cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
201
Views
2
Helpful
4
Replies

WSA

yoseph
Level 1
Level 1

hello all,

is it possible to access physical cisco WSA GUI without  license ???

 

1 Accepted Solution

Accepted Solutions

amojarra
Cisco Employee
Cisco Employee

Hello @yoseph 

As Balaji mentioned, you can access the GUI, even without any license, 

in case, you need to do some network configuration from CLI to be able to access the WSA:

[+] from CLI issue ifconfig > edit > select Mangement interface , follow the wizard to add IP address and GUI Port number.

[+] from CLI issue setgateway command to set the default gateway

[+] from CLI issue commit, to save the changes. 

Note: if you are seeing Certificate Error while trying to access GUI 

[+] from CLI> issue sslconfigVERSIONS > Choose the number associated with WebUI > enable TLSv1.2 > press enter to exit the wizard 

[+] from CLI issue commit, to save the changes. 

 

 

Regards,

Amirhossein Mojarrad

+++++++++++++++++++++++++++++++++++++++++++++++++++

++++        If you find this answer helpful, please rate it as such      ++++

+++++++++++++++++++++++++++++++++++++++++++++++++++

 

View solution in original post

4 Replies 4

balaji.bandi
Hall of Fame
Hall of Fame

Sure why not - by default it come with 90days eval license.

even it expired still you can access the GUI - because of the License expiry Functionality may vary.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

amojarra
Cisco Employee
Cisco Employee

Hello @yoseph 

As Balaji mentioned, you can access the GUI, even without any license, 

in case, you need to do some network configuration from CLI to be able to access the WSA:

[+] from CLI issue ifconfig > edit > select Mangement interface , follow the wizard to add IP address and GUI Port number.

[+] from CLI issue setgateway command to set the default gateway

[+] from CLI issue commit, to save the changes. 

Note: if you are seeing Certificate Error while trying to access GUI 

[+] from CLI> issue sslconfigVERSIONS > Choose the number associated with WebUI > enable TLSv1.2 > press enter to exit the wizard 

[+] from CLI issue commit, to save the changes. 

 

 

Regards,

Amirhossein Mojarrad

+++++++++++++++++++++++++++++++++++++++++++++++++++

++++        If you find this answer helpful, please rate it as such      ++++

+++++++++++++++++++++++++++++++++++++++++++++++++++

 

yoseph
Level 1
Level 1

thanks all.

could you mention please the upgrade cisco wsa physical appliance. my current version is 

11.8.0-453

and currently available versions are about 35 up to 15.2.0 so it takes time please share the right path

amojarra
Cisco Employee
Cisco Employee

@yoseph 

I would say it is best to check the release notes :

Release Notes for AsyncOS 15.2 for Cisco Secure Web Appliance - Cisco

 

you can see the upgrade path, known issues and fixed issues.

amojarra_1-1714064270950.png

 

Kindly be advised, you need to have Smart License , as "Mandatory Smart License for Secure Web Appliance

you can see the changes from above link, also to view the history of the changes:

https://www.cisco.com/c/en/us/support/docs/security/secure-web-appliance-virtual/220454-secure-web-appliance-release-changes.html

 

again, please before upgrade review the list of known issues

amojarra_2-1714064435632.png

 

 

Regards,

Amirhossein Mojarrad

+++++++++++++++++++++++++++++++++++++++++++++++++++

++++        If you find this answer helpful, please rate it as such      ++++

+++++++++++++++++++++++++++++++++++++++++++++++++++