Access Point 2702i & 2960 plus 48 poe compatibility

[keshavarz.ali]

Can i use Cisco Access Point 2702i with switch 2960+ 48pst-l with out poe injector or power adapter?

2702i have interface 10/100/1000  poe support and 2960+ have 10/100 poe support.

[Sandeep Choudhary]

Hi,

It will work but as you need to check if switch can provide the max power to AP or not to opertare with 3x4 MIMO. If AP will not get enough power then it will work with 3x3 MIMO.

Datasheet: http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-2700-series-access-point/datasheet-c78-730593.html

Reegards

Dont forget to rate helpful posts

[keshavarz.ali]

Thx