Wireless

Problem We are suspecting some client are unable to connect to 2802 APs. Clients are not connected to the nearest AP. even if a client is standing right in front of an AP, other APs with weaker signal are prefered.Affected clients are both Apple and ...

Hello Guys, quick question on the power requirement of 2802i-s AP. I currently have a 3850-48p switch and I just want to verify if this can support the PoE+ requirement of the 2802 AP?

I am using Prime infrastructure 3.1 and MSE's version is 7.4.100.0. I created network topology and added access point's.Now I can see clients on the list but there is no clients on the site map. Do you have any idea about problem ?

hello,  we have been asked to create a file such .bat or any thing else that could deactivate all the routing on Nexus 7010 . please could any one helep on explaining it because I went through the web looking for any information aboiut this but in v...

Hi, I have a MacbookPro 2016 Late, which always connected with the Aruba AP under 300Mbps data rate (MCS==13), which is lower as expected. I also have another old model of MacbookPro, which can achieve 450Mbps data rate (MCS == 23). I know the MCS va...

I have been using a WGB with multiple devices behind it on a client mesh network on single VLAN with no issue. Client has changed their requirement and now want multiple clients on multiple VLANS over the WGB. I have attempted to change the configu...

Hello Cisco-WLAN-Experts, I have noticed that our Cisco Prime Heatmaps are confusing regarding the color representation of WLAN APs with identical sending power. Eventhough the WLAN APs are configured with same sending power, the Color representation...

Hi, As long as WLC is configured as secondary unit, it will support maximum AP counts. but, it is valid only in 90 days, after, the user will see the warning message. my question is.. I don't image when the user see the warning message? when they c...

Hi guys, I am hoping to get some help please. So I am looking at doing some self-study on Cisco Wireless certification and bought a second Cisco 2504 WLC from internet and was told it has the basic 5 AP license to go with it. Now I've received the ...

Hi everybody I have a 2504 wireless LAN controller with part number "AIR-CT2504-50-K9". after upgrade from 7.6.120 to 8.2.151 , all license file lost!! and just evaluation license exist . How can i find my lost license?

What is difference between Dual  band & dual Radio  ?is this related to 2.4 & 5 GHz  ... or related to a/b/g & n ?

Hello Experts , I would like to setup sso for the 5520 wireless controllers and would have the following setup MDF 1 will have 1X  C1-WSC3850-48XS-S  and it would have 5520 primary controller connected to it MDF 2 will have 1X  C1-WSC3850-48XS-S an...

Hi All, Can anyone pls list the commands that can be used to troubleshooting wifi issues.Commands that can run in Cisco AP (AIRONET) and WLC. Also, facing some issues with guest wifi ID some users are getting disconnected from gust wifi after every...