Wireless

I can not connect to the AP 1602i, Already tried several times via console, but I can not connect, when I connect to a dhcp server he gets an IP, but I can not connect via http, ssh or telnet.Already tested on various browsers and already gave severa...

I have an AP 1602i that just came in but can not access it via the Console. I put it in the net to catch the DHCP but it exchange IP every 1 ~ 2 minutes. I do not have parent in my environment. One would have any idea what it is or what to do to acce...

Hi, What are the differnces between in choosing option 1 and 2 in the wlan profile 1)layer2 security WPA2 + WPAAUTH Key Mgmt : FT802.1X 2)layer2 security 802.1x AUTH Key Mgmt : FT802.1X Thank you 

Hi guys, I have setup one wlc with latest software with two AP. They are joining my controller but they don't have green light they blinking red green and "black"any ideas? i have setup 2504 with 2602 before with no certain problem kind regards

I have a WLC 5508 that runs about 37 AP's right now.  I need to shut off the 5hgz side of the Dual Band to do some testing.  How do you do it?

HI, I've recently purchased of ebay a Cisco 1112 Secure Access Control Server CSACS-1112-K9 as an additional piece of kit to be used with my cisco learning in my home lab. I didn't get any recovery Media, I was wondering if anyone knows or has a ve...

I know the 8500 WLC says that only 10G SR modules can be used.We are looking to redo our network configuration and are looking at buying some SFP-10G-AOC3M= assembliesThey do appear to be 10G SR modules with a permanent cable attached.We can not find...

I need your help ... I need capture all the traffic that goes from a wireless client 802.1x to AP and the AP to RADIUS and Customer . I connected a computer to a switch port where the AP is connected and configured as follows: monitor session 1 sou...

Just purchased a new 1832 access point to work as a single stand alone AP for a small office.  I have it configured and can access the controller website.  I have the SSID's set and clients can connect to the AP with network and internet access.  My ...

hi, i have wireless controllers 5508-50 i created 4 ssid's one ssid is for guest now i have to block the guest to acess internal services and they could not communicate our network except internet.can any one help me to solve this.

HI buddies, I have a question about maximum Tx power level in WLC. I want to know if I set WLC Tx power to e.g 17 dbm in TPC settings of 802.11b/g/n, would the maximum power the AP transmit to it's antenna is 17dbm? in this situation if I specially s...

I need to create a new interface on a HA 5508 pair with 7.6 code.  Do I need to break the HA pair to do that?  I assume all configuration changes on the primary will be pushed to secondary.  How about the change on the physical interface?. Thanks,

Dear AnyoneI have a bit confuse with antenna. Possible i using multiple antenna with 1 AP? for example i using 1550 which 1 raio port for patch and other with omi on 5 Ghz. And how it different with other model? such as 2702e / 1602e  because it have...