at my customer network wireless infrastructure, the cpu utilization always 0 % , is it normal for wlc ? thanks
at my customer network wireless infrastructure, the cpu utilization always 0 % , is it normal for wlc ? thanks
I am running a 2504 wireless controller using 8.0.120 code. Can some point me to where I would enable channel bonding and band select. Thanks Chris
I'm seeing very low throughput speeds for some users in my wireless network. I'm currently using a 5508 controller with 2602e AP's (4 antennas attached). I have no more than 16 users on a radio. Tested speed vary from 45 Mb/s to less than 1 Mb/s a...
I have a 1262 in the USA and these are my active power levels by rate: AIR-AP1262N-A-K9 show controllers dot11radio0 show controllers dot11radio1 2.4GHz: Active power levels by rate 1.0 to 11.0 , 20 dBm 6.0 to 48.0 , 17 dBm, changed d...
Hi all,I have installed dozens of WLCs but with this one customer rollout I have hit an impasse. The customer has a 98% MacOS device environment running a 5508 HA pair and 3702i APs. The Mac OSx users randomly lose access even when their device sit...
We've recently offered users free wifi to use while at work for streaming, browsing, etc... I tested for a couple of weeks before go-live with absolutely no issues. Since go-live, it has become so slow that it's unuseable. They have a 50Mb/s circu...
I try to setup the network "rules" for my public WiFi network. This network should permit outbound TCP: DNS, http, https, pop3, pop3s, IMAP, IMAPs and UDP: DNS, NTP. Inbound none (only established stateful connections from the above list). Can thi...
Hi all, I am deploying an 8500 WLC for a very large scale Flexconnect network. In fact, every AP will advertise Flexconnect locally switched WLANs only. Can I (and should I) map all WLANs to a 'null' interface which does not exist in data centre netw...
Hi Experts, I received a config template for Netflow to be configured in ther 5760. After applying the commands, everytime a chaned any configuration in any WLANS, I get a popup message (see attachment). I have attached the netflow config templat...
Hello. I would like to know if anyone can help me with Location Server. In our network we have 1 WCS 7.0.240.0, 4 controllers 7.0.220.0., and 1 Location server 6.0.202.0. After reinstallation of Location server we cannot add it to WCS (error " can...
Hello, I've a MSE 3355 and I need to change its IP address. I know I can run another time the initial configuration script but I want to be sure I won't loose the database history. In other words, if the startup script will put the MSE to the factory...
Hello, I got a Cisco 3702i with an autonomous image (ap3g2-k9w7-xx.153-3.JBB1) and I have some trouble with my download speed. When I do a TP test it's only half the speed of my download compared to my upload speed. Download: ~45.69Mbps Upload: ~94.3...
Will the WLC4402-12-K9 work with the AIR-LAP1042N-A-K9 and Catalyst WS-C2950G-48-El? WLC4402 -> FastEthernet0/5 (Catalyst 2950) -> AIR-LAP1042N-A-K9 (Plugged into FastEthernet0/6 on the Catalyst 2950)
Hi Guys, I am getting logs into my WLC controller, Please suggest me what could be possible for the same. Is it the comman unknow issue ? *reaperWatcher: Dec 04 16:45:36.781: %OSAPI-3-FILE_OPEN_FAILED: osapi_task.c:6746 Failed to open the file : /...
Tried all the troublshoot. Just can not get client to get ip address from windows DHCP server. DhCP server and AP and Clinet on same subnet. Switch is configured correctly, WLC vlan mapping correct. If change the AP to local mode all works just not i...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-12-2024 05:27 AM | ||
04-10-2024 01:01 PM | ||
04-05-2024 06:44 PM | ||
04-04-2024 03:18 AM | ||
03-27-2024 07:38 AM |
User | Count |
---|---|
13 | |
8 | |
4 | |
3 | |
2 |