Wireless

Hello,I would like to update my Prime Infrastructure installation to the latest 2.0. According to this document I'm trying to install the update pi_1.2.1.12_update.tar.gz but I always get this error:PRIME-0000-01/admin# copy ftp://172.16.14.102/pi_1....

Does anyone knows when they will be supported by the controller (if at all...)?Thanks,Sent from Cisco Technical Support iPad App

Just looking for any suggestions.  Went to a clients office yesterday to look at his AP; the AP wouldn't boot.  We replaced the power injector with one off another AP that was working, but it still didn't boot.  I took the AP unit back to our office ...

                   Hi,My customer is running 5508's with AP groups.So that new AP's don't transmit the SSID's before I'm ready, I've enabled the 'Out-of-box' feature, which places the AP's into a new group, which is system configured with the radios ...

Hi all, I am very new to wireless and I have question regarding the autonomous access pointCan we have Roaming with autonomous access points?? IF yes, what are the AP model that supports roamingAny help is much appreciated!!!

Forumwe have both and IPS 4240 as well as one of the newer IPS 4345 IPS units in place at this specific customer site.When I drill down into IME into Event Monitoring on the IPS 4345, I can see we are having multiple signature matches from I have thi...

Besides simply classifying devices as rogues, is there a way to shut them down or overwhelm them with deauthentication or disaccociation floods, something of the sort?

This is my first 2602 AP. Do all the nifty functions of 802.11n start automatically or do I have to enable them? Specifically I am asking about channel bonding and ClientLink.I did find where I can increase the channel width on my 5GHz band but wasn'...

Hi ,I am testing 1552e mesh AP.It gets its IP information from a lucent qip dhcp server.the problem is this AP gets an IP address and obtained controller IP via option 43 but when it tries to join it goes to another controller not the one on option 4...

Hi,I have a Cisco NCS(Prime Infrastructure) running the version 1.3 (1.3.0.20). I have added around 40 controllers to this Cisco NCS. I wanted to push a Light Weight AP configuration template to a Cisco Flex 7500 controller that is added to this NCS....

Can I add a custome based antenna in WCS for coverage prediction?

Hi,I'm a bit confused regarding the native Vlan of 1262 bridge ...My design is LAN---RAP ---- MAP---remote-SWITCH with two Vlan : one for the data and one for the management.I keep the vlan 1 for management at this point, but I'm still unable to acce...

Hi!I'm looking at upgrading a MSE 3355 because it runs a to old version compared to the WLCs. Then I thought to use same version as the WLCs with the highest software release number, 7.3.101.0. But when I look in the release notes on the MSE 7.3.101....