Wireless

I have a client that has a airport hanger 200 ft. by 150 ft with the ceiling being 70 ft high.  I'm thinking of using Cisco AP 2600 series access point  with directional or panel antenna's.  The client will be using VoWLAN all through the hanger, inc...

We have upgraded 2 of our 5 controllers to 7.2.111.3 but after the upgrade we get ssl-error on our web-auth ssid that use a local netuser. We tried to reinstall the certificate on the controller and it started working but stopped again after 10 min. ...

what is the difference betw two AP models? both work in dual band and work with WLCthey even look the same...

I recently had a number of CAPWAP access points lose IP connectivity, but were still up at L2 and seen by CDP.  Resetting them via PoE port shutdown recovered them, but no AP crash log or useful log info on the WLC.  The AP also had no local logging ...

My WCS quit, apparently after the server was rebooted following Microsoft updates while I was on vacation earlier this week. WCS 7.0.172Win Server 2003 R2 on VMware4BG RAM<6GB of 50GB disk space used. After stopping WCS & rebooting:Health Monitor is...

Hello,for mounting preparation I need information abouthole-size and hole pitch (position / distance between holes)for AP-Bracket-2 and ANT-2566P4W.I can't find this information (installation guides).RegardsSven

Hi there,Our Wireless Setup(Cisco 1242 AP with Cisco 5508 WLC) was running without any issues for two year lately over last two months there are issues with Signal Strength and our handhelp devices are unable to fectch needed data from the applicatio...

Dear Support Community,After a recent Apple iOS update for the iPad it was found that the airplay devices (Apple TV) were no longer found on the network only by those who had updated. Those who had not updated were still able to see the Airplay devic...

Hello,Is AP 1220B (b-only radio) supported for registration to WLC (7.0.x) with Lightweight software? I've managed to convert the AP to Lightweight mode, but I could not get it to register with WLC 2504 (software version 7.0). Is it possible that thi...

Dear Sir / Mdm Question 1)May i know ISE keeps track of active endpoints in its session directory, as long as the endpoints are authenticated sucessfully their sessions will be in the session directory and consume license counts until either accounti...

Any news?Sent from Cisco Technical Support iPhone App

Hi , We have a centralized Cisco 5508 WLC with 84 APs(1142N) in branches (slow WAN links), Current WLC  IOS version is 7.0.220.0. Recently we bought new Aps Air CAP36021-N. These APs are not compatible with existing WLC IOS.  If I upgrade WLC, then ...

I have Cisco LAP1522 configured as a Root Mesh AP - it needs to support multiple vlans across the mesh.  The G0 port is configured for trunk with VLAN 310 as native and VLAN 590 added as an allowed vlan.The AP is directly connect to a Cisco 3750G and...

Hi I have created SSID's that remote users can log onto to that point to thier own Radius servers. Someone suggested that I need to use Anchor Mobility. Can you please tell me what this is in WLC and where I can find this. Thank you