Listen here: S11|E6 Bridging the Gap: Cisco Catalyst CW9163E- The Ultimate Outdoor Wi-Fi 6E Solution In this episode, we're spotlighting the Cisco Catalyst™ CW9163E, a remarkable outdoor Wi-Fi 6E access point that's built to withstand even the harshe...
Forum Posts
I logged into the console of the Controller AP and show version got me this result:I recently upgraded from 8.3.133 to 8.10.185 but when it finished, the controller AP did not show up as an access point, which was previously shown when I was still in...
Is there a way or a solution to extract historical data from the 9800 wlc like number of clients on a particular day or can generate a report/graph on number of clients for a length of time? is this possible on cisco DNAC and how?
Hi, (it's better to say hello). Here's my problem On AP in root mode etc... On AP in repeater mode etc...here's the AP root configuration dot11 ssid WLAN_***authentication open eap eap_methods authentication network-eap eap_methods authentication...
Hi Everyone, I have a client that will be split in two differents entities with two differents LAN. But it will remains hybrid site with hybrid meeting room that will be used by employees from entity A and employees from entity B. So they want to imp...
Tenemos un AIR-AP2802I-A-K9 con el siguiente error en bucle:[*01/01/1970 00:00:21.3745][*01/01/1970 00:00:21.3745] (write)Unable to open I2C device interface (/dev/act2) for ACT2 (file = -1)[*01/01/1970 00:00:21.3749][*01/01/1970 00:00:21.3749] (ACT2...
Resolved! WLC9800 - no AP's joining
Good day,I have the following issue.I am configuring a WLC 9800 -l-f device and have the issue that the Access port is not getting the config from the controller. The AP just boots up and then flahes red and green. I think it cant get a connection to...
CURWB1CURWB2AntennaIW-ANT-OMH-2567-NIW-ANT-OMH-2567-NPIDIW9167EHIW9167EHIP ADDR192.168.1.10192.168.1.11MODEMESH ENDMESH POINT AP1# show dot11Radio 1 config Interface: enabled Mode: fixed infrastructure Frequency: ...
Hello,I am experiencing issues with Dell 7430/7420 laptops equipped with the Intel AX211 chipset, which randomly lose internet access throughout the day (Wi-Fi remains connected). This issue even occurs when laptops are stationary.I am using a Cisco...
Hai new Cisco 9115AX AP came with controller mode and I needed to join a controller, no DHCP available on the network, how to enter static IP on AP, i tried to enter like old 1800 AP but the ping and connectivity not working.converted AP using wirele...
Does any know how to recover root password on NCS?Sent from Cisco Technical Support iPad App
Hello,I have configured a new secure mobility tunnel between an 8540 foreign WLC (img: 8.10.190.0) and a 9800 anchor WLC (img: 17.9.4a) which has come up (both data/control paths). I have assigned the anchor mobility to a test SSID (MACB enabled) on ...
Hello,please do you have a FW for download?? thank you15.3.3(3)JBB ap3g2-k9w8.mx153-3.JBB/ap3g2-k9w8-xx.153-3.jbbcompiled by prod_rel_team
Hi, i want to change lightweight mode to autnomous mode on my AIR-CAP2602I-E-K9Therefor I downloaded the software ap3g2-k9w7-tar.153-3.JF15 and rename it to ap3g2-k9w7-tar.default. The file starts with info 0000644 3347037 0000031 00000000435 1411306...
My 9800-L-C wireless controller version is version 17.13.1. There is a bug in this version that causes a memory leak, which can be fixed by removing the gRPC subscription according to workaround. However, the link doesn't explain the specific configu...
