Wireless

Hi every one! I have this kind of issue, I connected a cable in Cat 2960-CX (trunk)  and other side SW C9200L-48P-4G this SW we ready connect 9 access point C9115AXI over POE, one time connected, automatic restart this only C9115AXI' ports...i been c...

So something I've been noticing a lot when attempting to troubleshoot clients through Prime Infrastructure... a lot of wireless clients seem to disassociate fairly frequently and then immediate associate again... usually to a different AP. The associ...

Hello. Please see 2 images attaches-- I/O graph, and pcap. QUESTIONS: 1. What does this specific pattern in this wireless I/O Graph represent? 2. Why does wireless device exchange no packets for approximately 1.5 seconds in a repeating pattern? Any h...

I am attempting to repurpose some 2602i's for use on a vWLC 8.5.171. However, when attempting to join, I receive a DTLS error. I believe this is due to an expired cert on the AP however the workarounds are not working. I have disabled NTP, changed th...

Hello Dear Members,   We need to set up access to guest user access. we configured the WLAN and security . But authentication page is not directly coming automatically when connecting. When i browse ip address page comes.   We use Active directory fo...

HiI had been using wireless routers for my home usage, made for the consumer market. I was having reliability issues, so decided to switch to a brand like Cisco and purchase one for my home use.I purchased the 145AC access point, and plugged it downs...

HiSo just upgraded 5520 to 8.10.170 from 8.5.182 95 % of the AP upraded no problem, 5% didn't.I saw them connect to the WLC and upgrade but didn't after that. What we found was the Router address was incorrect for the vlan in DHCP.  This mistake must...

We have two branch offices and the WAN is connected through IPsec tunnel. Presently those two office has Couple of AP's and it is connected to DC WLC in local- Centralize switching mode.  Now we are planning to enable Flex Connect mode to branch offi...