Wireless

I am installing the Cisco Aironet 1572EAC WAP and pg. 48 of the installation instructions points to 2 different caps to cover the AC power input. We are using PoE for the device so do I need to cover the AC input with Remke cap 75-0086 or the AIR-ACC...

Please clarify: I have multiple access points (BLR) location and two wlc's in Singapore wlc.One is the foreign wlc and the other is the Anchor wlc for the guest ssid.The access points  registered with the wlc-01 in singapore over internet(throught DM...

We have two WLC 4402s ( old I know ). I have always struggled keeping two sets of APs onto what should be the Controllers I want them to connect to. The VLANs for IP assignment to the APs are separate. They all share VLANs for open and secure SSIDs. ...

Can we install license on WLC 5508 using SFTP ? the instalation guide only shows tftp option.

I have 2 AP 2700E y just 4 antennas air-ant2535sdw-r.what happen, if I install 2 external antennas instead 4 antennas?How is the behavior of my AP?

I have the following toplogy:I am able to connect the students and lecturers to their respective WLANs. However when I save and reopen the packet tracer file, some devices will randomly become unable to connect to the WLAN. Reopening the same packet ...

NAD : WLC 5500 series Wireless controllers Running ISE 2.4 with PATCH 11 still seeing this error : Event : 5400 Authentication failed Failure Reason: 12953 Received EAP packet from the middle of conversation that contains a session on this PSN that d...

When new devices connect to wifi (authen dot1x by ACS) cisco 9800 always have issue can't connect wifi in 5minutes. I checked log and see it "Authorization failed or unapplied for client" x5 times => %CLIENT_EXCLUSION_SERVER-5-ADD_TO_BLACKLIST_REASON...

Hello i am puzzled with situation where lots of WAPs are trying to reach to destination IP address 13.13.13.13 via udp/5246 port.We have on prem WLC that has no traces of these WAPs; Prime Infrastructure shows info about only one access point in its ...

It looks like there is no real need to enable "HA SKU secondary unit" on the backup controller, since I could just simply add the same amount of licenses to both WLCs since my APs will only be joined to 1 WLC at a time? Am I correct? or am I misinter...

hello, when i plug my ap 2800 on my 2960X-FPS-L, i see only 15.4Watts on the 'sho power inline' and on my WLC, how ever, i know that hose AP needs more power, how can i enable the full power(POE+ or 802.3at) on my switch?there is no way to have the 3...

Hi everyone,I just wanted to share a recent experience that may avoid you some headaches. Last november we upgraded one of our WLCs from 8.2.166 to the still (Feb-18-2020) recommended version 8.5.151. A couple of days after the upgrade some users sta...