OK I have a Cisco AIR-AP1041N-A-K9 Aironet Autonomous Access Point. Basically however i configure it i cant connect to it. I've been following this guide: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/67134-wpa2-confi...
This might be a simple question to answer but basically, I am trying to confirm if whether or not a 240AC AP can be managed by a 9105 Catalyst AP that has embedded controller capability.From what I can tell, and based on what I can confirm on my own ...
Hi All,I would like to ask for your understanding on DCA section. Our current setting on Channel Assignment Method is Automatic and the interval set is 10 minutes. This works for both b/g and a radios. So I'm understanding that the controller should ...
Hi GuysHow the wireless Traffic encapsulated and flows from user to google.com let's sayuser > AP > WLC > CORE> FW > INET Router Thanks
Hola necesito crear un nuevo SSID que solo permita el acceso a una URL especifica y bloquee todo lo demás, probé varias alternativas pero no logro conseguirlo. Hello, I need to create a new SSID that only allows access to a specific URL and blocks ev...
I want to ask if the access point needs a license to join the controller? What if the access point still joins the controller even though it doesn't have a license? It will be disjoined after a while, for example. Thank you for help.
Hi, So i know these are new access points and a lot of things haven't been decided yet. I'm working on a design where I would like to use the 9120 access point with external antennas (preferrably in FRA mode). If I recall correctly I think it had an...
I have a problem with AP 1815i as it continuously disjoin the controller 9800 and restart and then loop in same action as shown in attached logs. These are the port configuration ==============Access switch============== interface gi1/0/21description...
Will just reload after the output command below ...initializing Hardware ...System integrity status: 90170200 12030106System Bootstrap, Version 16.10(2r), RELEASE SOFTWARECopyright (c) 1994-2018 by cisco Systems, Inc.Current image running: Boot ROM0L...
Hi, I have a CW9166 I-E AP and it is in Factory reset mode. I am trying to login to the console with below crediantials but unable to login.Cisco/Cisco, admin/admin, meraki serial number and no password.What is the correct credentials to login to the...
Hi I am using WLC 9800 ( hardware based) and 9166l LWAP .i have enforced qos policies to ap.I basically tried to priorities Video packets.When i am capturing pacp at controller after connecting the client to WLC, i can see that the traffic is going ...
Hello Everyone,We are currently running a 9800-40 on 17.9.4We took down multiple AIR-CAP2702I-B-K9 and now we are looking to reinstall them. They are doing exactly what is described in the bug CSCwd80290.I noticed in the article below, to fix the bug...
I'm checking for potential wiring issues on a 2800 via CLI. I did a "show int wired 0" and I'm not sure how to interpret the results. Rx err shows 125/0 while Tx is 0/0. Does that mean there have been 125 Rx errors on the interface, or something else...
Hi all I just want to ask you guys about this ErrorsI have Fcs Erros in Received Interface Is it okey guys?I use 10Gig Sfp type LRSoftware 8.5.151
Hello all, I am having issues with wireless controller Catalyst model 9800 L-F and access point model AIR-CAP3702i-A-K9. I have 2 of these access points and only one of them is able to join the WLC. The one giving me issues has a solid green light ...
