Wireless

Hi guys   I have a problem where my wlc will not authenticate via tacacs.net , the server is reachable from the controller and Authentication, Accounting and Authorization has been setup and enabled on the WLC priority is Tacacs/Local.  On the tacacs...

Hello,   My client cannot have his TKIP clients work on 2802 APs on an SSID configured with WPA+tkip and WPA2 + AES, even though the documentation says they should.   We found a workaround but I was wondering when I could tell the client that these o...

hello,  Can i change the regulatory domain (from  -A to -C: Canada to BRazil) by changing its firemware/software. This is an AP AIR-LAP1042N-A-K9, or AIR-CAP1602I-A-K9 ?  those AP are controled by a WLC 5520. Tx. B

Whether WLC QOS settings are applied Applying the QOS settings on the WLC will determine whether it applies to each user, whether it is applied as an SSID,I would like to know if other standards apply. As a result, I would like to know what standards...

I have a single Aironet 3702i that has 2 SSIDs configured on it. I am trying to configure a second Aironet 3702i as a repeater. When the 2nd repeater tries to associate, it fails, showing the following:   *Aug 6 11:12:38.303: %DOT11-4-CANT_ASSOC: In...

Hi   I have acquired two of these units and both of them have been completely wiped of their firmware (god knows why).  I have spent all afternoon and evening trying everything to get these working and yet they are still flashing red.   I've consoled...

Trying to figure out what is causing high channel utilization on 2.4Ghz channels in our environment. The thing thats really frying my noodle is that if I use spectrum expert to get a look at a channel (Ch. 1 in this case) on a particular AP, this is...

Hello WLAN experts, I'm trying to use the Pi Planning Mode to calculate the necessary number of 2802i WLAN APs for a given area of 1000m² using different protocols. The results are not logical for me. Maybe someone can explain it to me.   Besides the...

Hi,   We have installed Cisco Access points around our office with two SSIDs, one for the main office devices, and one for guests.    The access points use Cisco Aironet 1850 Series Mobility Express.   I would like to know if it is possible to block ...

Hi All, I use Cisco AIR-AP1231G-E-K9 succesfully but the same config with the AIR-AP1280B-E-K9 is not possible Could you please help me? I need to deploy the AP 1280B Monday or tuesday ... Config used : conf t dot11 ssid WiFi_Stef authentication op...

For an Access Point(3802i) switch port configuration, should I used trust COS or trust DSCP.  My uplink  to the core is L2 and I'm trusting COS.

We have a mix of APs in our environment with 3802i units mixed in amongst a mostly 3602i deployment.   Has anyone seen any issues with conflicts with having both in the environment?   We've had some weird cases of devices experiencing odd behavior in...

Ap 1832i is joining wireless controller 2504 normally. But not broadcasting ssid, another series is working properly and broadcasting except this series.

Edit I meant to post this in the standard Wireless and Mobility forum.. that's what I get for having too many tabs open.  Not sure if this needs to be moved or deleted and recreated?   Greetings all,   I'm trying to evaluate the 1815w units for possi...