Hi, As per Leo Laohoo 's recommendation - starting a new thread instead of adding to 'https://supportforums.cisco.com/discussion/10877506/ap-fails-join-controller'. The temptation to interject into that thread was too much - seeing that manjil.bhetw...
Hello Experts, The WLAN compliance looking has no information against the indoor APs for Qatar country. For other countries(Saudi, U.A.E, Bahrain..) in middle east the compliance tool has this information. What is the recommended domain for indoo...
Folks, Why is the range that one can set for the a/g/n radio for tpc under a rf profile from -10 to 30. If we try to set the power statically the range is much limited.
Hi everyone, Is there a way on MSE CAS to "filter" NB notification messages based on RFID tag or client movement? We received this unusual request to limit messages to any tag and client movement of 1m or over. Client stated they receive too many mes...
Hi All, I have a site in Mexico that I am ordering equipment for from a US vendor. Part of that equipment is 1702 Access Points. However, the regulatory domain for those AP's in the US is "B." Mexico uses regulatory domain "N." My vendor is based...
Hello, We have some APs that have been relocated from one controller to another. The original controller was a Cisco 5760 (IOS 3.6.6.E) and now im trying to get it to register to a Cisco 5520 (AIREOS 8.2.166.0) I cant get onto the AP but a debug fr...
I am trying to get an accurate view of my work flow and call volume throughout the day. I would like to know if there is a way to view and print calls transferred to me during the day? So a report of sorts.
We currently have a single WLC 5500 located at a remote site with about 400 - 500 users with multiple devices that is connected via Wired and Wireless. The site has 1 Gbps MPLS link, all outbound traffic from the remote site to internet and data cent...
This may be a silly question but for some reason I can't find any docs on changing the username password and exec password for the 2802i-b-k9. I know you can change them all with the wlc but I just want to change this one through the cli. Any sugge...
Hi Team, Getting Alert in ISE, How can we proceed further or can we remove backups and other old files. Version : 2.1.0.474 patch 2 Ise01/admin# show disks Internal filesystems:/ : 18% used ( 2417172 of 14987616)/dev : 0% used ( 0 of 8124320)/de...
I have a 3650 switch running 16.3.5b. If I wanted the config from a WAP that was connected to that switch and using its integrated wireless control module, how would I do that? Can i telnet/SSH into the IP? Or is there another way from the IOS of ...
I want to change the name and location of AP's that are connected to my 3650 wireless control module. I have found a post that list these commands as: config ap name Then you can also add the location value of the ap: config ap location Howe...
Hello In the past I have used the ---command line of controller ---- SHOW ADVANCED 802.11A txpower to obtain the power levels from my AP and what each DBm /mw they were I Can do this on every AP I have ever had 1131 1231 1142 2602 3602 2702 ...
Help, configure AP can`t type configure terminal, %Invalid input detected at ' ' marker thanks
Is there any way for WCS to include client details for autonomous APs in the reports and monitoring? I have added them to WCS, and have them snmp trapping to WCS - it sees they have client associations but no reports include their clients - only the ...
