Hi Team,
What we want to know that WLC2504 is supported to controlling bandwidth rate and data quota ? I saw that WLC 5000 series supported to those features. Are those features are in WLC 2504
Thanks
New to the boards..
We have multiple AP units installed at the ceiling height. (30ft) We have several "garage doors" that mobile units move through. The walls are 15 course brick with 15+' drywall - metal studs. The units drop connection as they...
I have a few setups like this on our site, all run without issue and the speeds are good. Basically we have a 1530 on each side using the 5GHZ antenna for the bridge link. The 2.4 antenna is disabled. These are standalone APs, not using a controll...
Hi Guys,
I want to create 3 SSID in WLC: 2 hidden SSID and one Broadcast. I want to let users to access through SSID broadcast and then when the user enter username and password then WLC switch these users intos hidden SSID...
Can i do this with ...
i have quite a no of unused 1200 11a AP, recently found out that i can take out the 11a module card from the AP.Question, can the Aironet 1200 runs in 11b after i have removed the 11a module and upgrade the firmware ?I found out that after i removed ...
Hi,
For the last two weeks our 1852 AP's have been randomly rebooting. All AP's are connected to an 3850 switch. Nothing in the logs on the switch indicating any issue with power. We are unable to determine why these device's are behaving this way. ...
Hi,in the documentation of the release 7.4, it's write that we can use ap3600 in OfficeExtend mode, but only the 3600 (integrated antenna) series. The 3600e (with external antenna) doesn't support OfficeExtend mode? if yes, why?thanks a lot for your...
I would like to create a template to turn off the Guest WiFi SSID for WAP's located in multi-tenant buildings. I can't find any examples how to do this.
Hi,
For the last two weeks our 1852 AP's have been randomly rebooting. All AP's are connected to an 3850 switch. Nothing in the logs on the switch indicating any issue with power. We are unable to determine why these device's are behaving this way. ...
Could anybody tell me how they get around the limitations of Mdns across subnets when using flex connect with dynamic vlan assignment. If I have an instructor who logs in and is assigned admin vlan and a student logs in and is assigned student vlan. ...
Using the WLC 2500, a 3750 and an AP3702i. Broadcast SSID is checked but never shows up in the air?
Status=Enable
Profile = Local-LEAP
SSID = Local-LEAP
Interface-Group =VLAN2
NAS-ID=NONE
L2 Security=WAP+WPA2
AES
802.1x Key management is checked...
Hi Wireless Experts,
hopefully someone can enlighten me regarding wireless QoS and usage of the Voice (AC_VI / Platinum) and Video (AC_VO / Gold) queues.
In your deployments - especially when using smartphones and laptops for voice (e.g. Jabber, Skyp...
Looking for a Prime 3.0 report that will show the configured interfaces on multiple 2504 controllers.
My intent is to find WLCs with missing interfaces.
Where would I find this information?
Hello,
i have two WLC Controller in the same Network und same VLAN, the APs are also in the same VLAN.
Both WLC have AP Wireless Clients online and the same RF Group. But both are RF Leaders and not see the antoher WLC?
