Wireless

I am noticing slow downloads with users connected to my secured SSID. User on the Guest SSID (open) do not see the issue. Downloads are ~17mbs uploads are +50 mbs. I am testing using iperf server on same Vlan as the access point. Any help would be ap...

Hello. I have posted here before and finally getting into the nuts and bolts of the Aironet 3802. I am having issues with the configuration on the WLAN. Under the VLAN & Firewall settings I have the Native VLAN ID set to 1 and the VLAN ID under the D...

We have just upgraded to PI 3.2.2 Patch 1 and want to setup e-mail notifications for various alerts.   When we go to create the notification policy it won't let us pick any of the Device Groups we've created because it shows an Empty List.  The text ...

Hi Everyone, I was hoping I might be able to find someone who can help here. We purchased a Cisco AIR-CAP2702i-B-K9 access point for a satellite office from a third party vendor (SHI) and we are getting ready to try to set up and configure it.   This...

Hi,   We are having 5508 controller with 26 access points.   We are getting below error messages for every 15 min.   Warning: Our AP with base radio Mac <mac id> is under attack (contained) by another AP on radio type.    I also upgraded with latest ...

Touchy subject around here, one person thinks we should turn Client Load Balancing and Band Select on (Cisco Best Practice) and one person thinks we should leave it off (get a better 5ghz site survey done).   What do you do on your locations?

I have a pair of WLCs, both with APs on, both serving Clients within the same, quite large, coverage area.  Both WLCs are connected to all of the same VLANs, both are in the same Mobility Group, etc.  The SSID we have uses WPA2-AES (802.1X) and we us...

Hello,Question related to campus fabric wireless Design? What does design requirement says about placing the WLC in a campus fabric?a) Can we have one WLC in one fabric, example all the access point on three different sites in the same campus fabric ...

Hello Folks,   I have a problem with a Cisco 1830i AP with Mobility Express and a Linksys repeater. The problem is:   On the client side, we can't put another cisco AP, just a repeater and I bought a Linksys RE4000W.   The repeater is broadcasting th...

Hi, Has anyone had issues with their 3802i APs using code set 8.2.111.0? Luckily we have only replaced 1, 3702i with our new 3802is, but I would like to know if there is a known issue with clients disconnecting. We are not having any wireless issue...