02-24-2008 10:04 AM - edited 07-03-2021 03:26 PM
The manual does not tell me how to turn the radio on. The product ships with the radio off
02-24-2008 10:30 AM
Hi Michael,
You have to configure a SSID first, then you should be able to turn up the Radio/Radio's;
Changes to the Default Configuration-Radios Disabled and No Default SSID
In this release, the radio or radios are disabled by default, and there is no default SSID. You must create an SSID and enable the radio or radios before the access point will allow wireless associations from other devices. These changes to the default configuration improve the security of newly installed access points.
http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b38jebrn.html#wp147963
Hope this helps!
Rob
02-24-2008 11:11 AM
Yes, that worked. Thank you
02-24-2008 04:51 PM
Hi Michael,
You are most welcome :) Glad to be of some small help.
Take care,
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide