04-29-2020 06:23 AM - edited 07-05-2021 11:59 AM
Hello together,
somebody any Idea what this CLI Massage means? SW Release 8.8.130.0.
%SIM-3-SIM_INTF_ID_INCORRECT: [PA]sim.c:12314 Interface Identifier incorrectly populated for interface vlXXX. (Here i cant find anything in the web)
and this one:
apfMsConnTask_2: : %APF-3-CHECK_SUPP_RATES_FAILED: [PA]apf_utils.c:219 Could not check supported rates. Invalid Supported Rates from station . Length :0. Mobile MAC:(Mac Adress)
Thanks a lot for Anwsers.
04-29-2020 07:56 AM
04-30-2020 12:19 AM - edited 04-30-2020 12:20 AM
Hi Scott,
thanks for anwsering:
Found this on google: https://quickview.cloudapps.cisco.com/quickview/bug/CSCvh77017
I saw this Bug, but it´s from WLC5500.
I wanna look in the Excel Sheets, hope to find something.
I´m wondering about something, at Network Summery in the Client Tab , SNR is 0 but the Signal Strenght for example -40 up to -60... here is something wrong :/
04-30-2020 02:27 AM
08-22-2021 11:52 PM - edited 08-23-2021 12:29 AM
Hello for everybody.
Is it possible to configure logging to a specific external tftp server, like tftpd64? Like "logging host 1.2.3.4" for switch or router.
08-23-2021 06:15 AM
You already posted the solution to your own question, but just to make sure: yes this is possible.
Just make sure you use a Syslog server, not tftp, for logging.
08-23-2021 01:30 PM - edited 08-23-2021 01:31 PM
Thank you for answer.
Yes, it is my mistake - not tftp, but syslog server. Like the next one.
08-24-2021 01:11 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide