cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
163
Views
3
Helpful
4
Replies

packetfence Captive portal issue

mohdhafiz4029ff
Level 1
Level 1

Hi ,

I have configured the packetfence according to guide , but when i go to connect the SSID. its directly connect and reach the internet and not redirected toward web auth page.

i cant find any logs and anything else to troubleshoot. pls check my config which i have shared in snapshot and suggest

Regards

Hafiz

4 Replies 4

marce1000
VIP
VIP

 

 - There are no attachments in your post  , what controller model are you using (including software version) ?

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Cisco 5508 controller, software version 8.5.171.0.


 

  - Checkout the controller configuration using WirelessAnalyzer input (procedure) for AireOs controllers and
    feed the output from that into Wireless Config Analyzer

  - Debug the clients needing captive portal according to https://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/100260-wlc-debug-client.html
     You can  have client debugs analyzed with  Wireless Debug Analyzer

  - As per https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html
             use 8.5.182.11
             which is strongly recommended since the 5508 is EOL (use last/latest release available)

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R
VIP
VIP

And refer to the web authentication guide: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/115951-web-auth-wlc-guide-00.html

Review Cisco Networking for a $25 gift card