WLC 7.0 => Limit possible numbber of connected clients per AP

[samir iguedelane]

Hello,

I was wondering if bug CSCsu24197 (Add limit to the number of association per AP) was fixed in a recent WLC release ?

=> https://supportforums.cisco.com/message/3328600#3328600

We are using WLC 7.0.116.0 and we would like to know if it was possible to limit the number of users PER access-point on the WLC with some recent  releases ?

Thank you very much.

Samir     

[Saravanan Lakshmanan · Accepted solution]

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_wlan.html#wp1667427

[samir iguedelane]

Hello Saravanan,

Thank you very much for your quick answer.

I understand it is possible in WLC 7.2 (so not possible possible in 7.0).

Do you know from which exact version this feature is supported ?

Best regards.

Samir

[Saravanan Lakshmanan]

From 7.0.116.0

http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_wlan.html#wp1540616

[samir iguedelane]

Hello Saravanan,

Thanks again.

In the above link for 7.0.116.0 I can see "Configure the Maximum Number of Clients per WLAN" but not

"Configuring Maximum Number of Clients per AP Radio Per WLAN"

And under my GUI in 7.0.116.0 I cannot see the option.

I suppose the option is supported only from 7.2 ?

Best regards.

Samir

[Saravanan Lakshmanan]

Per AP Radio limit introduced from 7.2. You may have cli only config for Per WLAN limit.

Per WLAN limit introduced from 7.0.116.0.

http://www.cisco.com/en/US/docs/wireless/controller/7.2/command/reference/cli72commands.html#wp13169011

config wlan max-associated-clients max-clients wlanid