Dear Community
Hope everything is going well.
Today I installed a new Modular Line Card on a ASR 9010. I followed the the isntruction on Cisco documentation but I got the following error messages and the MLC remains in the shutdown state.
RP/0/RSP1/CPU0:Jun 18 14:29:28.929 : shelfmgr[404]: %PLATFORM-SHELFMGR_HAL-7-CAN_INFO : Can API: slot 0 online event.
RP/0/RSP1/CPU0:Jun 18 14:29:28.960 : shelfmgr[404]: %PLATFORM-SHELFMGR_HAL-3-CAN_CARD_INVALID : Invalid card type -1 from slot 1 CBC
RP/0/RSP1/CPU0:Jun 18 14:29:33.989 : shelfmgr[404]: %PLATFORM-SHELFMGR-3-UNKNOWN_BOARD : Boot request from node 0/1/CPU0 contains invalid board type, This board is being shutdown
RP/0/RSP1/CPU0:Jun 18 14:29:35.135 : lrd[321]: %HA-LRD_inv-4-UNEXPECTED : Unexpected: lrdi_get_hwi_type: Unknown board type : 0x0
RP/0/RSP1/CPU0:Jun 18 14:29:35.135 : lrd[321]: %HA-LRD_inv-4-UNEXPECTED : Unexpected: lrdi_get_hwi_type: Unknown board type from slot: 0x81
RP/0/RSP1/CPU0:Jun 18 14:29:35.136 : lrd[321]: %HA-LRD_inv-4-UNEXPECTED : Unexpected: lrdi_get_hwi_type: Unknown board type : 0x0
RP/0/RSP1/CPU0:Jun 18 14:29:35.136 : lrd[321]: %HA-LRD_inv-4-UNEXPECTED : Unexpected: lrdi_get_hwi_type: Unknown board type from slot: 0x81
I think this could be due to the IOS XR version incompatibility with the MLC but I just wanted to double check if there is no hardware issues with the card prior to start an upgrade of the router.
Any previous experience with this situation??
Thanks in advance
BR
