cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
987
Views
0
Helpful
0
Replies

ASR9912 and VSM for arbor peakflow 8.x cannot ping arbor mgmt

alessandro.dona
Level 3
Level 3

Hi Guys,

 

i recently installed  a VSm-500 module on an ASR9912 (5.3.4).

I followed the steps reported in the online guide but i cannot ping from ASR the mgmt of arbor

RP/0/RP0/CPU0:ASRTESTPLANT#ping 192.168.180.1
Tue Oct 10 18:02:26.134 UTC
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.180.1, timeout is 2 seconds:
.....

beside i cannot ping in terafce on ASR

 

P/0/RP0/CPU0:ASRTESTPLANT#ping 192.168.180.2
Tue Oct 10 18:02:37.995 UTC
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.180.2, timeout is 2 seconds:
.....

!
virtual-service enable
virtual-service TMS_VSM_TEST
 vnic interface TenGigE0/6/1/0
 vnic interface TenGigE0/6/1/1
 vnic interface TenGigE0/6/1/2
 vnic interface TenGigE0/6/1/3
 vnic interface TenGigE0/6/1/4
 vnic interface TenGigE0/6/1/5
 vnic interface TenGigE0/6/1/6
 vnic interface TenGigE0/6/1/7
 vnic interface TenGigE0/6/1/8
 vnic interface TenGigE0/6/1/9
 vnic interface TenGigE0/6/1/10
 vnic interface TenGigE0/6/1/11
 activate
!

!
interface TenGigE0/6/1/5
 description mgt0_tms_vsm
 ipv4 address 192.168.180.2 255.255.255.252
 load-interval 30
!

 

TenGigE0/6/1/4                 unassigned      Shutdown        Down     default
TenGigE0/6/1/5                 192.168.180.2   Up              Up       default
TenGigE0/6/1/6                 unassigned      Up              Up       default

 

 

did i miss anything(configuration or a pie maybe)?any idea to solve my issue?

 

RP/0/RP0/CPU0:ASRTESTPLANT#sh inventory
Tue Oct 10 18:04:16.280 UTC
NAME: "module 0/RP0/CPU0", DESCR: "ASR 9900 Route Processor for Packet Transport"
PID: ASR-9900-RP-TR, VID: V02, SN: FOC1827N6GX

NAME: "module 0/RP1/CPU0", DESCR: "ASR 9900 Route Processor for Packet Transport"
PID: ASR-9900-RP-TR, VID: V02, SN: FOC1838NQ6C
.
.
.
.
.

: "ASR9K Virtualized Services Module"
PID: A9K-VSM-500, VID: V01 , SN: FOC1845NLNH

NAME: "module 0/6/1", DESCR: "Virtual Module"
PID: A9K-MODULEv, VID: N/A, SN: N/A

 


  Node 0/RP0/CPU0 [RP] [SDR: Owner]
    Boot Device: disk0:
    Boot Image: /disk0/asr9k-os-mbi-5.3.4.sp4-1.0.0/0x100305/mbiasr9k-rsp3.vm
    Active Packages:
      disk0:asr9k-mini-px-5.3.4
      disk0:asr9k-services-infra-5.3.4
      disk0:asr9k-px-5.3.4.sp4-1.0.0
      disk0:asr9k-fpd-px-5.3.4
      disk0:asr9k-mgbl-px-5.3.4
      disk0:asr9k-mpls-px-5.3.4
      disk0:asr9k-mcast-px-5.3.4
      disk0:asr9k-optic-px-5.3.4
      disk0:asr9k-video-px-5.3.4
      disk0:asr9k-services-px-5.3.4
      disk0:asr9k-doc-px-5.3.4
      disk0:asr9k-k9sec-px-5.3.4
      disk0:asr9k-li-px-5.3.4
      disk0:asr9k-bng-px-5.3.4
      disk0:asr9k-9000v-nV-px-5.3.4
      disk0:asr9k-asr901-nV-px-5.3.4
      disk0:asr9k-px-5.3.4.CSCvf85579-1.0.0
      disk0:asr9k-px-5.3.4.CSCva93787-1.0.0

Regards

Alessandro

 

 

 

 

 

 

0 Replies 0