HelloIs it possible to use QSFP-40/100-SRBD transceiver for uplinks when we use 93600CD-GX as a leaf switch?Many Thanks
The content you are looking for has been archived. View related content below.
HelloIs it possible to use QSFP-40/100-SRBD transceiver for uplinks when we use 93600CD-GX as a leaf switch?Many Thanks
Hi,There is a command "show tcp statistics" to get tcp statistics.whether this tcp statistics are of VSM or it includes tcp statistics of VSM+VMs on ESX.Thanks,D V
I have a Nexus 9504 with dual supervisors I am unclear having read the release notes for 9.3(10) as to how the upgrade works. There is no concept of a slave supervisor looking at the directory structure. The release notes state to conduct the upgrade...
We are looking into implementing VXLAN in our Data Center and the question of where to connect our Data Center firewalls came up. We have 2 relatively small Data Centers with firewalls in each running HA. Our Data Center firewalls use BVIs. In a spin...
Hi team, Is it possible to configure macsec on a 100G unplink Nexus C93180YC-FX3? I found this information about the Nexus 93180YC-FX3"Beginning with Cisco NX-OS Release 9.3(7), the Cisco Nexus 93180YC-FX3, and 93108TC-FX3P switches support MACsec o...
HiI am trying to do virtual nexus 9000v lab, to test out various VXLan scenarios.And keep coming up against the same frustrating issue. After enabling the nve features required for the config and rebooting the switches (dont need GNS3 running when I ...
Hello, I am getting IPFM requirement, but I am searching for document to learn why we need IPFM in the first place? Why IPFM? Why not Cisco ACI? Why not our legacy switches platforms like 2960, 3560 etc.? I mean, why IPFM invented as we already have...
Good MorningWe want connect two DC using BGP EVPN solution having VXLAN feature in each site. We have doubts about if is possible extend VNI over a network with this approach :EVPN-VXLAN <-> EVPN-MPLS <-> EVPN-VXLANWe have found information with Juni...
Hello Experts, We are constrained on resources and want to purchase the cheapest switch that can support as a boundary clock form a PTP grandmaster. We have purchased a PTP grandmaster which syncs with GPS for time. We now want to distribute it to a ...
Dear Support Team, We have a baseband ip video spine & leaf Project here in UAE dubai, we are system integrators working on TV channels, in this project we have below Cisco switches. 1. SPINE 2X switches are N9K-C9504-B2-R 2. Leaf 6X switches models ...
Team, After testing a configuration with 2 9k Nexus, 1 iosvl2 switch, and an ios host testing HSRP and it is not working during a simulated down interface event. Everything else seems fine VPC checks, port-channels check, HSRP checks, tracking checks...
Hi, I want to configure netflow on N5K in two switches in vPC, follow the config:feature netflowflow record record_nfmatch ipv4 source addressmatch ipv4 destination addressmatch transport source-portmatch transport destination-portcollect counter byt...
How to prevent fabric advertising the host routes to the outside network I was thinking the redistribute direct route-map XXX can do the work, but in fact, the host routes still learn from leaf-node and are received by BorderLeaf, and then BL adverti...
We have been having problems with upgrading one of out NCS 5501-SE to version IOS-XR 7.7.21 from version 7.5.2.We have followed the guide to upgrade by doing a "Classic Upgrade". We get the following error message when we do an "install activate id <...
Hi, Hi, I have two Nexus 5672 switches with active FCOE protocol. They have worked without problems for several years. We are noticing some issues such as: %NPV-5-FRAME_DISCARDED: %$VSAN 4%$ Frame with unexpected FC2 status 0xc received on interface ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
03-27-2024 04:57 AM | ||
03-25-2024 01:07 AM | ||
03-22-2024 01:22 PM | ||
03-16-2024 08:18 PM | ||
03-13-2024 09:21 PM |