CUE access GUI

[nisar valappil]

We installed CUE. How to access cue through web interface. Please send me the details... Also how to create username and password for access cue through web interface...see bleow my cue details

  [0;1mSMSCUE E# #    [0msh ver  [0K

  [0;1mSMSCUE#  [0msh ver  [0K

  [0mSMSCUE E# #   sh ver  [0K

SMSCUE uptime is 1 weeks, 1 days, 20 hours, 49 minutes

CPU Model:                    Intel(R) Celeron(R) M processor         1.00GHz

CPU Speed (MHz):              1000.304

CPU Cache (KByte):            512

BogoMIPS:                     1970.17

SKU:                          NME-CUE

Chassis Type:                 C2851

Chassis Serial:               FHK1313F12Q

Module Type:                  NME

Module Serial:                FOC13233GQU

UDI Name:                     Not Available

UDI Description:              Not Available

SATA Drive:                   80.0GB

SDRAM (MByte):                512

  [0;1mSMSCUE#  [0m [0K

[marioabelha]

Hi,

do http to this address (check trough CLI wich is your ip, in my case its 10.1.10.1)

interface Integrated-Service-Engine0/0

description cue is initialized with default IMAP group

ip unnumbered Loopback0

ip nat inside

ip virtual-reassembly in

service-module ip address 10.1.10.1 255.255.255.252

service-module ip default-gateway 10.1.10.2

[nisar valappil]

I already configured which one you gave the configurations. Still i didnt get the GUI .  when i tryung to use on GUI its not running.. see below image. So please give me solution as soon as possible..

interface Integrated-Service-Engine1/0

ip unnumbered Loopback0

service-module ip address 172.16.4.2 255.255.255.252

service-module ip default-gateway 172.16.4.1

no keepalive

[nikhijos]

Hi,

Please refer the following document for installation prerequisites and installation guide.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_0/install/prereq.html

(This document gives details of CUE 7.0 version)

Use,

ip route <Service-module IP> <subnet mask> <gateway address>

example: ip route 10.3.6.128 255.255.255.255 Service-Engine1/0

Also confirm that you can reach to CUE IP address from the machine that you are browsing GUI,

Also confirm that the Service module IP address that you are giving is a public IP,

If it is private IP then it will not work.

Thanks,

Nikhil Joshi.

[nisar valappil]

Thanks for your supports....

Its working now.. But i forgot the login username and password. So how to recover username and password. Please help me as soon as possible.

[nikhijos]

Check this link

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_password_recovery09186a008042aa29.shtml