1 Reply Latest reply: Nov 19, 2012 11:14 AM by Kelli Glass RSS

SRST Router Outbound Call Configuration

mohamedbineesh

Please CHeck the Below Configuration....here the Connection plar

three voice-port 0/2/0 , 1 , 2   are configured with Connection plar 1201 , 1202 , 1203 respectively.

Now i want it in reverse way. when ever a 1201 DN Phone calls to PSTN , it should select only Voice-port 0/2/0

and whenever 1202 Phone Makes a PSTN Call it should go through only voice-port 0/2/1 etc.

 

BR1#show run

Building configuration...

 

Current configuration : 2500 bytes

!

version 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname BR1

!

boot-start-marker

boot-end-marker

!

!

no aaa new-model

memory-size iomem 5

ip cef

!

!

!

!

no ip domain lookup

!

multilink bundle-name authenticated

!

!

!

trunk group  outside

description OUTGOING TRUNK GROUP

!

!

!

voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

sip

  bind control source-interface FastEthernet0/0

  bind media source-interface FastEthernet0/0

  registrar server

!

!

!

voice class codec 1

codec preference 1 g711ulaw

codec preference 2 g729r8

!

!

!

voice class h323 1

h225 timeout tcp establish 3

h225 timeout setup 3

!

!

!

!

!

!

!

!

!

voice register global

system message "9971 SIP Phone in SRST MODE"

max-dn 4

max-pool 4

!

voice register pool  1

id network 192.168.10.0 mask 255.255.255.0

!

!

!

!

!

!

!

archive

log config

  hidekeys

!

!

!

!

!

!

!

!

interface FastEthernet0/0

ip address 192.168.10.221 255.255.255.0

duplex auto

speed auto

!

interface FastEthernet0/1

no ip address

shutdown

duplex auto

speed auto

!

ip forward-protocol nd

!

!

no ip http server

no ip http secure-server

!

!

!

!

!

!

!

control-plane

!

!

!

!

!

!

!

dial-peer voice 1 voip

description TO CUCM PUB

preference 1

destination-pattern 1...

session target ipv4:192.168.10.101

dtmf-relay h245-alphanumeric

ip qos dscp cs3 signaling

voice-class codec 1

voice-class h323 1

!

dial-peer voice 2 voip

description To CUCM SUB

destination-pattern 1...

session target ipv4:192.168.10.102

dtmf-relay h245-alphanumeric

ip qos dscp cs3 signaling

voice-class codec 1

voice-class h323 1

!

dial-peer voice 3 pots

trunkgroup outside

description To HQ in WAN FAILURE

preference 2

destination-pattern 11..

prefix 769                                ## COnverting to FUll length PSTN Number 76511.. of HQ ###

!

dial-peer voice 4 pots

trunkgroup outside

description To BR2 in WAN FAILURE

preference 2

destination-pattern 13..

prefix 789

!

dial-peer voice 101 pots

trunkgroup outside

description OUTGOING International CALLS

destination-pattern 900T

prefix 00

!

dial-peer voice 102 pots

trunkgroup Outside

description Outgoing National Calls

destination-pattern 90[1234678].......

forward-digits 9

!

dial-peer voice 103 pots

trunkgroup Outside

description Outgoing local calls

destination-pattern 9[1234567]......

forward-digits 7

!

!

voice-port 0/2/0                      ###FXO Ports

  connection-plar opx 1201

  bearer-cap speech

  trunk-group outside

 

voice-port 0/2/1

  connection-plar opx 1202

  bearer-cap speech

  trunk-group outisde

 

voice-port 0/2/2

  connection-plar opx 1203

  bearer-cap speech

  trunk-group outside

!

!

gatekeeper

shutdown

!

!

call-manager-fallback

secondary-dialtone 9

max-conferences 8 gain -6

transfer-system full-consult

ip source-address 192.168.10.221 port 2000

max-ephones 3

max-dn 6 dual-line

system message primary "SCCP Phonesin SRST Mode"

keepalive 10

!

!

line con 0

exec-timeout 0 0

logging synchronous

line aux 0

line vty 0 4

login

!

!

end

 

BR1#

  • 1. Re: SRST Router Outbound Call Configuration
    Kelli Glass

    mohamedbineesh,

     

    This community does not provide technical support and is not staffed with technical support experts. I recommend you post this and future technical support questions to the Cisco Support Community (https://supportforums.cisco.com/index.jspa) where our Cisco technical support experts provide debugging assistance.  Another option is to open a ticket with the Cisco Technical Assistance Center (www.cisco.com/go/support) to get expert assistance.


    We do encourage you to participate in the Cisco Collaboration Community and to also join our Cisco Collaboration User Group program!  In the community, we encourage your discussion/sharing around collaboration topics and Cisco Collaboration Solutions, including business and IT requirements, industry trends, process, culture/organization issues, how collaboration can be used to transform businesses, vendor selection, adoption, training, architecture, licensing, and product features/functionality. If you are a customer or partner, you can also join the user group program to be eligible for member-only events and influence product direction.


    We hope to hear from you again.

    Kelli Glass, Moderator for the Collaboration Community