08-26-2013 03:31 AM - edited 03-19-2019 07:10 AM
Hi All,
We have planned to upgrade CUCM from 8.6.2 to 9.1.2 . I hope it's L2 upgrade where we are going to switch from active to Inactive version.
Apart from that has any special care we need to take or any document which will explain the detail procedure for CUCM 9.1.2 ?
Has thery any downtime or outage will be there while upload the 9.1.2 patch in active partition ?
Thanks in Advance
Solved! Go to Solution.
08-27-2013 10:38 PM
Hi
You can also refer the document which is posted in the support forum by Cisco for Upgrade to 9.1.x
https://supportforums.cisco.com/docs/DOC-34659
the docuemtn name is as below.
Drive_to_Nine_Direct_upgrade_virtual_versions_8.0.2-9.0.1_to_9.1.1.pdf (1.9 MB)
Refer Page 10 step 5, this is for CUCM 8.6 and above upgrade steps.
Also If you see below link
https://supportforums.cisco.com/thread/2227395
Q: Does upgrading to CUCM 9.1 involve a Refresh Upgrade (RU)?
Ans: From CUCM version 8.5 and below, we need to do a refresh upgrade, due to change the RHEL version from 4 to RHEL 5.
From 8.6 and above, its a L2 upgrade.
Also check the release notes for Importent notes.
regards
Ronak patel
08-26-2013 09:03 AM
Yes, there will be downtime involved as the upgrade would need reboots. All of it is well documented in CUCM 9.1.2 release notes guide.
GP.
08-27-2013 08:31 PM
I hope it's L2 upgrade where we are going to switch from active to Inactive version.
Yes 8.6 to 9.1.2 is a L2 upgrade as 8.6 is already on RHEL 5. So you dont have to apply COP file during the upgrade
Apart from that has any special care we need to take or any document which will explain the detail procedure for CUCM 9.1.2 ?
Gajanan has provided the link please read through that. You will need to make sure you meet system requirements for CUCM 9 (CPU, RAM, HDD) and also plan for license migration. Again details in the link provided above.
08-27-2013 10:38 PM
Hi
You can also refer the document which is posted in the support forum by Cisco for Upgrade to 9.1.x
https://supportforums.cisco.com/docs/DOC-34659
the docuemtn name is as below.
Drive_to_Nine_Direct_upgrade_virtual_versions_8.0.2-9.0.1_to_9.1.1.pdf (1.9 MB)
Refer Page 10 step 5, this is for CUCM 8.6 and above upgrade steps.
Also If you see below link
https://supportforums.cisco.com/thread/2227395
Q: Does upgrading to CUCM 9.1 involve a Refresh Upgrade (RU)?
Ans: From CUCM version 8.5 and below, we need to do a refresh upgrade, due to change the RHEL version from 4 to RHEL 5.
From 8.6 and above, its a L2 upgrade.
Also check the release notes for Importent notes.
regards
Ronak patel
02-03-2014 08:11 AM
Hi :
can you please advise by detailed steps describes how to manage license while upgrading from 8.6.2 to 9.1.(2)
and how to obtain it successfully on the upgraded version .
thanks ....
02-03-2014 10:29 PM
Pls mail licensing@cisco.com to know migration procedure.
GP.
02-05-2014 08:03 PM
This VoD should also help you with license migration procedure https://communities.cisco.com/videos/11774
**please note that this URL is accessible only to Cisco Partners.
GP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide