cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6774
Views
0
Helpful
1
Replies

Attendant Console standard version 10.6 can not open

Janya0001
Level 1
Level 1

Hi everyone,

    My first time to purchase and install Attendant Console. I try to followed this document (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuacs/10_6_0/install_admin_guide/CUACS10601872GUIDE.pdf)

for install it. I already have installed it,but I can not open it. I opened log from "\Users\\AppData\Roaming\CUACSLogging", I got this


2015-04-27 17:42:25,057 [1] DEBUG General - Logger was created successfully.

2015-04-27 17:42:25,089 [1] DEBUG General - Creating module catalog.

2015-04-27 17:42:25,494 [1] INFO  General - Cisco Unified Attendant Console Standard. Version: 10.6.0.1872, M: UCCONNECT1, O: Microsoft Windows NT 6.1.7601 Service Pack 1, P: 4, B: False, W: 25980928, T: 131430

2015-04-27 17:42:25,494 [1] DEBUG General - Module Catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Database module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Crypto module has been created

2015-04-27 17:42:25,572 [1] DEBUG General - Docking module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Axl service module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Alert Service module has been created in module catalog

2015-04-27 17:42:25,572 [1] DEBUG General - Import Service service module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Presence service module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Directory search module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Email service module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Keyboard Shortcut service module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - License module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Directory Service module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Application Dial Rule Service module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - CTI Service module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - SSOService module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Repository module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Business Usecase module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Application Navigation module has been created in module catalog creation process begins

2015-04-27 17:42:25,572 [1] DEBUG General - Module catalog creation process completed

2015-04-27 17:42:25,572 [1] DEBUG General - Configuring module catalog.

2015-04-27 17:42:25,572 [1] DEBUG General - Creating Unity container.

2015-04-27 17:42:25,744 [1] DEBUG General - Configuring the Unity container.

2015-04-27 17:42:25,853 [1] DEBUG General - Adding UnityBootstrapperExtension to container.

2015-04-27 17:42:26,368 [1] INFO  General - ValidateDatabase() - directoryPath:C:\ProgramData\CUACS\CUACS.db

2015-04-27 17:42:27,289 [1] INFO  General - DatabaseValidation.Create(Success)

2015-04-27 17:42:27,289 [1] DEBUG General - Configuring ServiceLocator singleton.

2015-04-27 17:42:27,289 [1] DEBUG General - Configuring region adapters.

2015-04-27 17:42:27,320 [1] DEBUG General - Configuring default region behaviors.

2015-04-27 17:42:27,320 [1] DEBUG General - Registering Framework Exception Types.

2015-04-27 17:42:27,320 [1] DEBUG General - Creating the shell.

2015-04-27 17:42:27,335 [1] DEBUG General - SetPINGRegistries - Setting application name registry in HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_SCRIPTURL_MITIGATION

2015-04-27 17:42:31,177 [1] ERROR General - App.HandleException.Msg:Resolution of the dependency failed, type = "Arc.George.Host.GeorgeShell.Views.Shell", name = "(none)".

Exception occurred while: Calling constructor Arc.George.EntityService.ExtendedGeorgeEntities().

Exception is: ConfigurationErrorsException - The 'DbProviderFactories' section can only appear once per config file.

-----------------------------------------------

At the time of the exception, the container was:

  Resolving Arc.George.Host.GeorgeShell.Views.Shell,(none)

  Resolving parameter "viewModel" of constructor Arc.George.Host.GeorgeShell.Views.Shell(Arc.George.Host.GeorgeShell.ViewModels.ShellViewModel viewModel)

    Resolving Arc.George.Host.GeorgeShell.ViewModels.ShellViewModel,(none)

    Resolving parameter "configRepository" of constructor Arc.George.Host.GeorgeShell.ViewModels.ShellViewModel(Microsoft.Practices.Prism.Events.IEventAggregator eventAggregator, Arc.George.Repositories.IConfigRepository configRepository, Microsoft.Practices.Prism.Logging.ILoggerFacade logger, Arc.George.Common.WPF.DialogService.IDialogService dialogService, Microsoft.Practices.Unity.IUnityContainer container, Arc.George.EntityService.IEntityCacheManager cacheMan)

      Resolving Arc.George.Repositories.Classes.ConfigRepository,(none) (mapped from Arc.George.Repositories.IConfigRepository, (none))

      Resolving parameter "entityCacheManager" of constructor Arc.George.Repositories.Classes.ConfigRepository(Arc.George.EntityService.IEntityCacheManager entityCacheManager, Microsoft.Practices.Prism.Logging.ILoggerFacade logger, Microsoft.Practices.Prism.Events.IEventAggregator eventAggregator, Microsoft.Practices.Unity.IUnityContainer container, Arc.George.EntityService.ExtendedGeorgeEntities extendedGeorgeEntities, Arc.George.Repositories.Interfaces.ICryptoRepository crypto)

        Resolving Arc.George.EntityService.EntityCacheManager,(none) (mapped from Arc.George.EntityService.IEntityCacheManager, (none))

        Resolving parameter "extendedGeorgeEntities" of constructor Arc.George.EntityService.EntityCacheManager(Arc.George.EntityService.ExtendedGeorgeEntities extendedGeorgeEntities, Microsoft.Practices.Prism.Logging.ILoggerFacade logger, Microsoft.Practices.Prism.Events.IEventAggregator eventAggregator)

          Resolving Arc.George.EntityService.ExtendedGeorgeEntities,(none)

          Calling constructor Arc.George.EntityService.ExtendedGeorgeEntities()

,StackTrace:   at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name, IEnumerable`1 resolverOverrides)

   at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name, ResolverOverride[] resolverOverrides)

   at Microsoft.Practices.Unity.UnityContainerExtensions.Resolve[T](IUnityContainer container, ResolverOverride[] overrides)

   at Arc.George.Host.BootStrapper.GeorgeBootstrapper.CreateShell()

   at Microsoft.Practices.Prism.UnityExtensions.UnityBootstrapper.Run(Boolean runWithDefaultConfiguration)

   at Microsoft.Practices.Prism.Bootstrapper.Run()

   at Arc.George.Host.App.RunInReleaseMode()

My system information below:

-Windows 7 Professional 32 bit./Ram 4 GB/CPU Core i5-4590

-Unified CM server version 9.1.2.10000-28

-Every port are opened.

-Disable Antivirus

-Windows permission is full access control

-Already created user and access control group.

I guess,cause from this config :

In the Cisco Unified Presence Server Connection Information page, type the following:

• The Server Address or URL required for hosted presence.

• The Domain containing the server • The Cisco Unified Presence User Name to use

• The Cisco Unified Presence Password appropriate to the User Name

I setup correct IP of CUP but user/password I enter as same as user-id/password of application user on UCM. I really don't know how to create it. Any one can suggests me to create?

And what is wrong my configuration?

Thanks in advance.

1 Reply 1

keglass
Level 7
Level 7

Janya,

This community does not provide technical support and is not staffed with technical support experts. I recommend you post this and future technical support questions to the Cisco Support Community (https://supportforums.cisco.com/index.jspa) where our Cisco technical support experts provide assistance. Another option is to open a ticket with the Cisco Technical Assistance Center (www.cisco.com/go/support) to get expert debugging assistance.


Hope this helps.

Kelli Glass

Moderator for Cisco Customer Communities

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: