03-30-2016 12:31 AM
Jabber SDK Web MR 11, Sample Code was downloaded from: Cisco DevNet: SDK Web SDK - Voice and Video - Downloads and Docs
Run Sample.html,
The click on the link for manual Sign in fails to provide the required page for configuration of for Username, Password and CUCM.
Could you please provide the working Sample code for Manual Sign in.
Solved! Go to Solution.
04-04-2016 02:26 AM
Got the following steps through Support : We tried and its working.
Assuming everything is installed and working correctly (the plug in, the Chrome extension if you're using Chrome, etc.), then you may simply be running into a problem if you are trying to use sample.html directly as a local file. It is written to be viewed and tested from a web server.
Something like this won't work:
file:///E:/Cisco/Jabber/VoiceVideo/samples/sample.html
But this should work fine (assuming you have a web server set up on your localhost, etc.):
03-30-2016 01:23 AM
TAC Case 638612623 raised.
04-02-2016 05:58 PM
Yeah , The video is timing out for me.
04-04-2016 02:26 AM
Got the following steps through Support : We tried and its working.
Assuming everything is installed and working correctly (the plug in, the Chrome extension if you're using Chrome, etc.), then you may simply be running into a problem if you are trying to use sample.html directly as a local file. It is written to be viewed and tested from a web server.
Something like this won't work:
file:///E:/Cisco/Jabber/VoiceVideo/samples/sample.html
But this should work fine (assuming you have a web server set up on your localhost, etc.):
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: