APIC-EM <-> Prime Infrastructure PnP brings error after upgrade from APIC-EM CA2 to GA 1.1.0.767.

[steffen.bodensohn@heraeus.com]

Hello,

with APIC-EM Ca2 release the PnP functionality works pretts well with Prime Infrastructure 3 (Patch PI 3.0.3 installed)

It brings the following error:

Error in create Or Update pre-provisioning Details

On the other side I see that the configuration is transfered to APIC-EM GA but no site is being created.

Does anyone know how to fix this ?

[yawming]

Please see this discussion see if it is related to your issue.

Failed to delete device in device provisioning profile PnP.

[steffen.bodensohn@heraeus.com]

Can I download PI 3.1 somewhere ?

Best regards,

Steffen

[yawming]

Don't know it is available already, maybe post it in Cisco Prime Infrastructure can get the right answer.

[steffen.bodensohn@heraeus.com]

Hi,

after checking CSCuw88261 it still does not work but I´m one step further.

Now PI adds the project to APIC-EM.

But I still got the error in creating or updating pre-provisioning details.

The workaround did not work successfully :-(

"Workaround:

We need to create PnP Profile with new name."

Error from PI

Configuration is transmitted

:

Image transmitted:

Project transmitted:

No device information transmitted:

Best regards,

steffen

[Geevarghese Cheria]

Hi Steffen,

  As per Bug ID - CSCuv10564 Found some steps.

Can you please try the following Steps to verify:

1. Enable APIC EM in PI

2. Create a PNP and provisioning profile (Is it this step not allowed)????

3 Make the APIC EM down

4. Try to delete the provisioning profile.

Result: PI doesn't allow to create or delete the provisioning profile and throws a clear error message as expected.

5. Now edit the APIC EM in PI

6. Try to delete the provisioning profile when associated with the older APIC

Also as Yawming has mentioned request to post the query under  Cisco Prime Infrastructure community.

Thanks and Regards,

Geevarghese

[steffen.bodensohn@heraeus.com]

Hi,

I´m allowed to create and delete the provisioning profiles in PI.

-> Image, Project and Configuration is transmitted from PI to APIC-EM.

But: The device Information is not transmitted (see last screenshot).

I guess this behaviour brings up the mentioned error in PI.

Is there a debug to have a look  how the interaction between PI and APIC-EM performs ?

I will ask regardingPI 3.1 in Cisco Prime Infrastructure community.

Thanks !