Centralized CVP 11 Survivability

[safak.budak]

Hi all,

I am using standalone CVP and I have installed VVB at the hub site. All calls coming from the branch gateway are configured to be sent to the VVB. How can i configure survivability on the ingress gateway? Here is the configuration on the gateway:

voice-port 0/1/0

connection plar 2000

dial-peer voice 2 voip

preference 1

destination-pattern 2000

session protocol sipv2

session target ipv4:X.X.X.X  

dtmf-relay rtp-nte h245-signal h245-alphanumeric

codec g711ulaw

(X.X.X.X is Virtual Voice Browser)

dial-peer voice 10 pots

destination-pattern 0..........

port 0/1/0

forward-digits all

There is no application configured on the gateway yet.

Regards,

Safak

[Chintan Gajjar · Accepted solution]

you can configure survivability on inbound pots or VOIP dial-peer, you have to identify the dial-peer dial-peer which is being chosen for incoming leg and configure survivability on it.