cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1972
Views
3
Helpful
1
Replies

00:00:00:00:00:00 as MAC address in authentication session

umahar
Cisco Employee
Cisco Employee

Hi,

We are seeing huge number logs on ISE coming from MAC address 00:00:00:00:00:00 from different switches

The show authentication session output from the switch is shown below

The interface is configured with multi-auth and the phones and machines are working properly in DATA and VOICE domain.

Has anyone observed these logs before ?

What could be source of these requests ?

I do not see any such entry in the mac address table from that interface

1 Reply 1

thomas
Cisco Employee
Cisco Employee

Assuming your endpoints aren't spoofing 0000.0000.0000, your switch is clearly not picking up the correct MAC address from the endpoint or is garbling it at some point since your IOS auth-session output shows 0000.0000.0000. Garbage in, garbage out to ISE. Most likely a switch bug.

Highly recommend you upgrade your switch software to the recommended version in the ISE Compatibility Guides.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: