cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
786
Views
1
Helpful
1
Replies

Register Expires Value: 3rd party SIP app gets "SIP Station Keepalive Interval” from UCM rather than the expire value set in SIP profile

william016
Level 1
Level 1

3rd party SIP device setting:

       1)The device type is "Third-party SIP Device (Advanced)”

       2)The device SIP Profile is set as “Standard SIP Profile for Mobile Device”

       3)The settings in the sip profile are set as below:

           Timer Register Expires (seconds)Required Field: 720

           Timer Keep Alive Expires (seconds)*: 120

          (Refer to Page 31 of http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/iPhone/9_5/JABI_BK_J38B2ACB_00_jabber-iphone-server-setup-9-5.pdf)

       4)SIP Station Keepalive Interval: 240

       5)Save and Apply

       6)UCM replies 240 for Expires for 3rd party SIP device register

Is that the expected, or the setting in the SIP profile should be respected?

Log attached,

Call-ID: e9IaDl1mFA

SDL001_100_000159.txt

Thanks a lot in advance

William

1 Reply 1

Mark Stover
Cisco Employee
Cisco Employee

For 3rd-party SIP, I've always made the app/device match the UCM settings. It's easier to troubleshoot if everything is using the same set of timers anyway.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: