Hi guys,
i'm Alberto and i need your help.
I was doing some test on my router Cisco 1921 - ipsec configuration.
To stop the evaluation time, i wrote the command:
license boot module c1900 technology-package securityk9 disable
end
write
reload
Now the router goes always in rommon prompt.
I tried to give another ios without good results...
Below it is what brought me back:
System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.
Total memory size = 512 MB
CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled
Readonly ROMMON initialized
program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0
IOS Image Load Test
___________________
Signature did not verify
Signature DID NOT VERIFY
boot: cannot load "usbflash0:"
Readonly ROMMON initialized
rommon 1 >
Please, can someone help me to restore the device?
Thanks in advance!!!
Bye!! Alberto