08-18-2016 10:42 AM - edited 03-19-2019 11:29 AM
Hello Team,
I need to know what options are available with BE6S-PRI-M2-K9 for IP phone door bell integration.
Any document explaining this would be very helpful ?
Regards
Inderpal Singh
Solved! Go to Solution.
08-18-2016 10:54 AM
Inderpal
If this is a plain jain analog device use FXS, otherwise look at IP vendors like this
http://www.2n.cz/en/products/intercom-systems/analog-intercoms/helios/
08-18-2016 10:54 AM
Inderpal
If this is a plain jain analog device use FXS, otherwise look at IP vendors like this
http://www.2n.cz/en/products/intercom-systems/analog-intercoms/helios/
08-18-2016 11:09 AM
Hi Srinivasan,.
Thanks for your response.I saw documents related to CME and IP phone door bell using FXS, but did not find anything documents for BE6S platform mentioned with FXS port.Do we see any difference in terms of Configuration when using the above platform with Spare FXS port.
Regards
Inderpal Singh
08-18-2016 11:21 AM
Just follow the same process that you have used with ccm like you did in the past since be6ks is just ccm under the hood
Thanks
Srini
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: