12-29-2016 11:51 AM
We have done the following to an 8851
1. enabled its Built in Bridge (BiB)
2. configured it for automatic call recording enabled
3. setup a recording profile and configured the phone to use it
4. Setup recording media source to "phone preferred".
5. Setup a route pattern and SIP trunk to the recording device
When I call the route pattern directly, the trunk is engaged a call is made to the recording device. However, when we make a call to the 8851 which should engage the route pattern and send a fork of the audio via BiB to the recording device, this never happens.
My question: How can we test the BiB to make sure it is working in the phone? Is there anything else we should do to make the phone engage the route pattern automatically to send a fork of the audio to the recording device?
Solved! Go to Solution.
01-04-2017 05:26 AM
Hi Dustin,
This would be a TAC issue rather than a developer one, please raise a case with them on configuration and feature issues.
Mark
01-04-2017 05:26 AM
Hi Dustin,
This would be a TAC issue rather than a developer one, please raise a case with them on configuration and feature issues.
Mark
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide