cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
525
Views
2
Helpful
1
Replies

Is Netflow enabled in the always-on Sandbox?

afahmy
Cisco Employee
Cisco Employee

Hi all,

I'm working on the always on Sandbox. when i do a GET on /policy/flow it erturns session info as provided below

       + destIP=10.1.15.117

       + interfaceName=GigabitEthernet1/0/47

       + sourceIP=10.1.12.20

       + networkDeviceId=5b5ea8da-8c23-486a-b95e-7429684d25fc

       + id=f4cd53b7-18e4-4c48-94e1-dcfe2548ba75

       + protocol=udp

       + networkDeviceName=CAMPUS-Access1

       + clientReference=client123

       + status=ACCEPTED_DELETE

       + flowType=VOICE

       + interfaceId=6e4e5ae6-6045-4060-9038-1a64d5a101cc

       + destPort=5060

Where is the session info coming from? Does netflow need to be enabled on all switches to be able to provide this info?

1 Reply 1

aradford
Cisco Employee
Cisco Employee

These entries are "Dynamic QoS" entries.  The use case is for soft phones for voice and video calls.

There is an API that Cisco Communications Manager (or other voice systems) can use that allows you to specify a source/destination IP/port for voice and video streams.

The QoS markings will dynamically be assigned to the point of ingress onto the network (e.g. interface on a switch port) that the host is attached.

You delete the policy when the call is torn down and the QoS policy is removed.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:


This community is intended for developer topics around Data Center technology and products. If you are looking for a non-developer topic about Data Center, you might find additional information in the Data Center and Cloud community