Guest OS not starting on 156-3.M2

sjur · ‎04-12-2017

We had the guest OS running fine on the 156-3.M and M1b version, but upgrading to the lastest seems it does not want to start.

Doing a bundle install on this fine

ir800-universalk9-bundle.SPA.156-3.M2.bin

We tested to download the image directly and uninstall the bundled version. same result.

Also tried to just install the Guest OS from M1b and M version, but same problems.

IR800#bundle install flash:ir800-universalk9-mz.SPA.156-3.M2 exclude HV-IOS

Installing bundle image: /ir800-universalk9-mz.SPA.156-3.M2, exclude Hypervisor and IOS image..........

IR800#

IR800#guest-os 1 start

Starting Guest OS ...... Done!

IR800#show iox host list detail

IOX Server is running. Process ID: 325

Count of hosts registered: 0

IOX Server Address: 0.0.0.0; Port: 22222

IR800#

What can we debug here?

IR800#debug iox

IOX debugging is on

IR800#show debugging

IPv6 iOAM debugging error[0]

chuli2 · ‎04-12-2017

Hi Sjur,

Please first check if you have the network configured properly.

If the Guest OS has started and you can telnet to the Guest OS, then you probably refer to the solution to the close caveats CSCvc53541 in the release note http://www.cisco.com/c/en/us/td/docs/routers/access/800/829/15-6-3M2-Release-Notes.pdf

If the Guest OS has not started, you may have to bundle install the image again but make sure that the Guest OS is not running before installation kicks off.

Regards,

Chun

sjur · ‎04-16-2017

Thanks.

Checked the cave eats, but did not find anything. Double checked config according to examples.

Ended up doing a full install (bundle install with M2) and a reload. This helped.

IR800#show iox host list detail

IOX Server is running. Process ID: 325

Count of hosts registered: 1

Host registered:

===============

IOX Server Address: FE80::200:CFF:FEE7:7899; Port: 22222

Link Local Address of Host: FE80::1FF:FE90:8B05

IPV4 Address of Host: 192.168.1.6

IPV6 Address of Host: fe80::1ff:fe90:8b05

Client Version: 0.4

Session ID: 1

OS Nodename: IR800-GOS-1

Host Hardware Vendor: Cisco Systems, Inc.

Host Hardware Version: 1.0

Host Card Type: not implemented

Host OS Version: 1.3.2.3

OS status: RUNNING

Interface Hardware Vendor: None

Interface Hardware Version: None

Interface Card Type: None

Applications Registered:

=======================

Count of applications registered by this host: 0