Hi,
I have a chasis Catalyst 4507 (WS-C4507R-E with running software version cat4500e-entservicesk9-mz.151-2.SG6.bin and two WS-X45-SUP6-E. Can the same supervisor always be started as active? For example, Slot3
B_P5_4507_SR#sh module
Chassis Type : WS-C4507R-E
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 48 10/100/1000BaseT POE E Series WS-X4648-RJ45V-E JAE12034SVO
2 48 10/100/1000BaseT POE E Series WS-X4648-RJ45V-E JAE1224L2H6
3 6 Sup 6-E 10GE (X2), 1000BaseX (SFP) WS-X45-SUP6-E JAE14031J7G
4 6 Sup 6-E 10GE (X2), 1000BaseX (SFP) WS-X45-SUP6-E JAE14041WKW
5 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45 JAE11528TEA
6 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45 JAE11528TGL
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 001e.7af2.42e0 to 001e.7af2.430f 1.0 Ok
2 001d.7049.0310 to 001d.7049.033f 1.0 Ok
3 001e.7af5.5140 to 001e.7af5.5145 1.6 12.2(44r)SG1 15.1(2)SG6 Ok
4 001e.7af5.5146 to 001e.7af5.514b 1.6 12.2(44r)SG1 15.1(2)SG6 Ok
5 001e.beaf.76a0 to 001e.beaf.76cf 2.4 Ok
6 001e.beaf.7340 to 001e.beaf.736f 2.4 Ok
Mod Redundancy role Operating mode Redundancy status
----+-------------------+-------------------+----------------------------------
3 Active Supervisor SSO Active
4 Standby Supervisor SSO Standby hot
Tkanks
