cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4470
Views
5
Helpful
7
Replies

Can't Connect to IOx Local Manager - 15.6.3M2 - IR829

Justin Chin-You
Level 1
Level 1

Team, I'm all out of ideas on this one. Really not sure where to go, I've got IOx working on another IR829 no problems but this one is fighting me.

I followed this guide to setup the environment: https://communities.cisco.com/docs/DOC-60826

The only thing i didn't do was configure NAT since there is no requirement for me to connect this to a public network.

I'm unable to browse to the local manager. (https:.//192.168.1.100:8443)

After completing all the other steps:


IOx Host comes up as expected:

Customer-IR829#show iox host list detail

IOX Server is running. Process ID: 330

Count of hosts registered: 1

Host registered:

===============

    IOX Server Address: FE80::FA0B:CBFF:FEAA:C80C; Port: 22222

    Link Local Address of Host: FE80::1FF:FE90:8B05

    IPV4 Address of Host:       192.168.1.100

    IPV6 Address of Host:       fe80::1ff:fe90:8b05

    Client Version:             0.4

    Session ID:                 2

    OS Nodename:                Customer-IR829-GOS-1

    Host Hardware Vendor:       Cisco Systems, Inc.

    Host Hardware Version:      1.0

    Host Card Type:             not implemented

    Host OS Version:            1.3.2.3

    OS status:                  RUNNING

    Interface Hardware Vendor:  None

    Interface Hardware Version: None

    Interface Card Type:        None

    Applications Registered:

    =======================

        Count of applications registered by this host: 0

Unable to telnet into the Guest-OS

Customer-IR829#telnet 192.168.1.100 2070

Trying 192.168.1.100, 2070 ...

% Connection refused by remote host

Upgraded and Downgraded Software:

Customer-IR829#show ver

Cisco IOS Software, ir800 Software (ir800-UNIVERSALK9-M), Version 15.6(3)M2, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2017 by Cisco Systems, Inc.

Compiled Wed 29-Mar-17 20:43 by prod_rel_team

ROM: Bootstrap program is IR800

Customer-IR829 uptime is 18 minutes

System returned to ROM by Firmware Upgrade at 21:50:51 UTC Mon Jun 19 2017

System image file is "flash:/ir800-universalk9-mz.SPA.156-3.M2"

Last reload reason: Reload Command

Confirmed Line settings:

line 1 2

transport input all

transport output all

stopbits 1

line 3

script dialer lte

no exec

transport preferred lat pad telnet rlogin lapb-ta mop udptn v120 ssh

transport input all

transport output all

line 4

no activation-character

no exec

transport preferred none

transport input all

transport output all

Anyone have any ideas why I can't pull up the local manager?

Thanks,

Justin

1 Accepted Solution

Accepted Solutions

Justin Chin-You
Level 1
Level 1

Okay, for anyone else who has run into this issue....

1) I had to Reverse SSH into the GOS (in my case 192.168.1.100)

     a) Use the user/Pass you created for Priv 15

2) Check the services

GOS#monit summary

Cannot translate 'Customer-IR829-GOS-1' to FQDN name -- Temporary Failure in name resolution

The Monit daemon 5.14 uptime: 15h 58m

Process 'dmo'          Running

File 'product_id'        Accessible

File 'hwid'                 Accessible

File 'svcbr0'              Accessible

File 'ioxcaps'            Accessible

Process 'caf'            Not Monitored

<snip>

3) Perform steps to change PID in the caf process

     a) Release Notes: Cisco IOS Release 15.6(3)M2 - Release Notes for Cisco IR800 Industrial Integrated Services Routers and Cisco 1000 Series…

     b) Post on issue here: Re: Unable to start CAF on freshly installed IR809

4) Edit /etc/hosts file to include the hostname for the GOS (in my case Customer-IR829-GOS-1)

5) Restart the caf service

     a) GOS#monit start caf

View solution in original post

7 Replies 7

Justin Chin-You
Level 1
Level 1

Just adding to this, if I do a packet capture and try to browse to the local manager I get a TCP RST.

Web Browser says "Connection Refused"

Hi Steve,

Thanks for the reply. I did see that note but for the workaround to work I need to be able to telnet to the Guest-OS and I'm not able to do that. I get a connection refused.

To access the Local Manager, you need to set the related PAT rules. Please see IR 8xx Platforms - IOx Docs

I'll give it a shot. Based on the instructions my understanding was that NAT/PAT is not required as my laptop is on the inside of the network and can directly reach the GuestOS.

The instructions also call out that I could use a public IP and not use NAT/PAT here.

Hi Steve,

FYI... No luck configuring NAT did not help.

Justin Chin-You
Level 1
Level 1

Okay, for anyone else who has run into this issue....

1) I had to Reverse SSH into the GOS (in my case 192.168.1.100)

     a) Use the user/Pass you created for Priv 15

2) Check the services

GOS#monit summary

Cannot translate 'Customer-IR829-GOS-1' to FQDN name -- Temporary Failure in name resolution

The Monit daemon 5.14 uptime: 15h 58m

Process 'dmo'          Running

File 'product_id'        Accessible

File 'hwid'                 Accessible

File 'svcbr0'              Accessible

File 'ioxcaps'            Accessible

Process 'caf'            Not Monitored

<snip>

3) Perform steps to change PID in the caf process

     a) Release Notes: Cisco IOS Release 15.6(3)M2 - Release Notes for Cisco IR800 Industrial Integrated Services Routers and Cisco 1000 Series…

     b) Post on issue here: Re: Unable to start CAF on freshly installed IR809

4) Edit /etc/hosts file to include the hostname for the GOS (in my case Customer-IR829-GOS-1)

5) Restart the caf service

     a) GOS#monit start caf

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: