09-04-2017 11:54 AM
Hi,
I have an existing UCS system with fully configured lot of UCS profile templates and policies, i would like to copy the same config to my new UCS system as well especially service profiles, service profile templates and policies so i no need to create them manually when ever i get new UCS. PLease suggest how i can do it.
Thanks for your time
Solved! Go to Solution.
09-25-2017 10:16 AM
Hi Venkatadri,
Take a look at one of my blogs from a few years ago, https://blogs.cisco.com/datacenter/synchronize-ucs-objects
There is a newer version of UCS PowerTool than mentioned in the blog, https://software.cisco.com/portal/pub/download/portal/select.html?&mdfid=286305108&flowid=79283&softwareid=284574017
As well the copy and sync Cmdlets may support a few more options. Check the UCS PowerTool User Guide for the latest compare and sync samlpes, https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/msft_tools/powertools/ucs_powertool_book/2x/b_Cisco_UCSM_PowerTool_UG_Release_2x/b_Cisco_UCSM_PowerTool_UG_Release_2x_chapter_010.html#concept_580AFB4065584F7B973C5C4D6DBF943E
Hope that helps.
Regards,
John
09-25-2017 10:16 AM
Hi Venkatadri,
Take a look at one of my blogs from a few years ago, https://blogs.cisco.com/datacenter/synchronize-ucs-objects
There is a newer version of UCS PowerTool than mentioned in the blog, https://software.cisco.com/portal/pub/download/portal/select.html?&mdfid=286305108&flowid=79283&softwareid=284574017
As well the copy and sync Cmdlets may support a few more options. Check the UCS PowerTool User Guide for the latest compare and sync samlpes, https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/msft_tools/powertools/ucs_powertool_book/2x/b_Cisco_UCSM_PowerTool_UG_Release_2x/b_Cisco_UCSM_PowerTool_UG_Release_2x_chapter_010.html#concept_580AFB4065584F7B973C5C4D6DBF943E
Hope that helps.
Regards,
John
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: