Hi Guys , APIC can add F5iWorkflow as Hybrid ( neither fully Managed nor Unmanaged ) where Service Attributes can be taken care by iWorkflow ,
Is it recommended for UCSD to directly interface with iWorkFlow or through APIC controller ?
I would recommend what ever is simpler and for the next person to grasp.
As your attached graphic indicates you have TWO MODES HERE:
network policy mode - no service graph - EPG static binding - then UCSD must interact with IWORKFLOW AND F5 directly
Service MANAGER mode - service graph (managed or unmnaged) then UCSD should interact with APIC
Retrieving data ...