cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
946
Views
0
Helpful
0
Replies

Unity Connection 11.5.1 SU1 -> SU3 upgrade, service impact during upgrade

dmotloch
Level 1
Level 1

hey everyone -

we are planning an upgrade from SU1 to SU3.  According to some details online, from the moment we start our upgrade on the PUB to the moment the switch version completes (including upgrading the SUB - so approx 4hrs) no new messages will be delivered.  Can someone validate this for us?

Here is the snip I found about this - am I reading it right?

--------------

Status of Unity Connection Cluster During an Upgrade

When a Unity Connection cluster is upgraded, the publisher server is completely disabled for the entire duration of upgrade but the subscriber server continues to provide services to users and callers. However, the performance of the cluster is affected in the following ways:

  • If the phone system is routing calls to the subscriber server, outside callers and Unity Connection users can leave voice messages but the messages are not immediately delivered to user mailboxes. During switch version on the subscriber server in a cluster, messages that were left on the subscriber server are copied to the publisher server and delivered to user mailboxes.
  • Unity Connection users can use the telephone user interface (TUI) to play messages recorded before the upgrade starts but cannot play the messages recorded during the upgrade.
  • Unity Connection may not retain the status of messages. For example, if a user plays a message during the upgrade, the message may be marked as new again after the upgrade. Likewise, if a user deletes a message during the upgrade, the message may reappear after the upgrade.
  • During an upgrade, users can access Unity Connection using clients, such as ViewMail for Outlook and Web Inbox other than the telephone user interface (TUI). During the switch version, publisher displays "message could not be loaded" for web inbox. The subscriber is completely disabled during the switch version.
  • Administrator users can make configuration changes using any of the administration applications, such as Cisco Unity Connection Administration and Cisco Unified Operating System Administration since the administration applications are disabled for both publisher and subscriber during an upgrade. The configuration changes cannot be made during the switch version.
  • Intrasite, intersite or HTTPS networking with other servers is disabled for the duration of the switch version. Directory changes made on the other servers in the network are not replicated to the server or cluster until the switch version is complete.
0 Replies 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: