Hi there,
I have recently begun playing with APIC-EM,although it is easy to manage it,I have a problem.
APIC does not discover devices properly.I have simple topology where apic is connected to R1 and R1 ins connected to R2/R3. RIPv2 runs between routers so networks are reachable.What I noticed that, when I run discover,devices logs %SYS-5-CONFIG_I: Configured from 10.10.10.10 by snmp. Plus,wireshark capture proofs that APIC connects to devices.However I only see R1 as a resulf of this discovery test.Most interestingly,even R1 is not added to Device Inventory list ( may be it must be enabled somehow,but I didnt see such option).
CDP method does not work either.
thanks in advance,
HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.
