11-20-2017 05:02 AM
How I can get the instance number of ISE VM?
Solved! Go to Solution.
11-20-2017 05:28 AM
show udi via CLI
otherwise on the licensing page at the bottom this same info is listed
11-20-2017 05:11 AM
Can you explain more what you’re trying to do and what’s this needed for? Don’t recall instance id is or used for
11-20-2017 05:17 AM
I'm trying to get renoval of the support of the licensing ISE ISE-VM-K9.
I already tried the SN number, but is not valid.
So, I need the instance number.
11-20-2017 05:28 AM
show udi via CLI
otherwise on the licensing page at the bottom this same info is listed
11-20-2017 05:45 AM
Hello, Janson,
I
I typed the commnad "show udi" and "show inventory", both commands list the same SN.
But, this SN is not valid under CISCO CSC.
So, I'm not able to renoval my license.
I tried the GUI interface under licensing options and the same SN.
Do you have other command?
BHZ-APP-ISE01/admin# sh inventory
NAME: "ISE-VM-K9 chassis", DESCR: "ISE-VM-K9 chassis"
PID: ISE-VM-K9 , VID: V01 , SN: GALHTLEUAJA
BHZ-APP-ISE02/admin# sh inventory
NAME: "ISE-VM-K9 chassis", DESCR: "ISE-VM-K9 chassis"
PID: ISE-VM-K9 , VID: V01 , SN: 8CNJDOEGFPB
BHZ-APP-ISE03/admin#
11-20-2017 06:10 AM
This is all that’s used
Either you registered the wrong box or something is messed up with licensing
I assume you’re pulling this information from your administration node is that correct?
Only your administration nodes are licensed
If you’re still running shoe trouble please reach out to the licensing team
09-08-2020 06:50 PM
Hi Alexgamarano,
I have the same issue. Would you help advise how can I get the instance number for ISE VM ? I want to renew support service and Cisco service team asked me to provide instance number.
Best Regards,
An
09-23-2020 08:44 AM
Team I have the same issue, do you know how I can get the instance number?
09-23-2020 11:27 AM
did you send the Serial Number (or UDI SN) of the Primary PAN to the Cisco Service/License Team?
Note: you can check the Serial Number via:
CLI > show udi
CLI > show inventory
ISE GUI > Administration > System > Licensing
Hope this helps.
09-23-2020 11:36 AM
11-24-2021 10:16 AM
I work for a reseller and have a client who is running into this same issue. The Serial Numbers that display in Show UDI are generated when they deploy the device and not something that ties back to the original transaction. Since this was originally purchased through my firm, I have no visibility into the SO# or any other info on the original transaction.
It appears I need an instance number or the PAK key to pull up the renewal info, the serials don't do the trick.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide