cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
662
Views
2
Helpful
4
Replies

Change MNT roles?

I have a TAC and they were wondering on swapping pri/sec mnt roles to see if it would fix the issue. My question he couldn't answer is will this cause a system reboot? I know if you change pri/sec admin both will restart at the same time. Just wondering if it would do that if changing mnt roles?

Thanks,

1 Accepted Solution

Accepted Solutions

Ping Zhou
Level 8
Level 8

SSwapping Pri and Sec roles for the two MnT will NOT trigger rebooting. I did it to my 1.4 and 2.2 fully distributed deployment.

View solution in original post

4 Replies 4

Ping Zhou
Level 8
Level 8

SSwapping Pri and Sec roles for the two MnT will NOT trigger rebooting. I did it to my 1.4 and 2.2 fully distributed deployment.

Thanks, they'd kill me if it did since they do wired and wireless auth.

Understood. And you will find out the role swapping on MnT is very smooth and quick.

hslai
Cisco Employee
Cisco Employee

Only the process "M&T Log Processor" is restarted on both primary and secondary M&T nodes, when I tried it on an ISE 2.2 deployment setup with 4 nodes.

FYI.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: