Auto Trunk Config Via ISE

[anthony.salmon]

Hi,

Looking for some information on how to configure ISE to automatically change access ports to trunk ports on our switches, based on a list of certain MAC Addresses. So for example, we have a set of Meraki MR233 APs, and we would like to just plug these into the switch, the MAC address is matced with a group in ISE, and the port auto changes to trunk.

Im not sure what this feature is called or if its possible, but any help would be appreciated. Thanks.

[Craig Hyps]

Few options:

• Enable NEAT under common tasks for RADIUS Authorization
• Config Cisco-Av-Pair under Advanced Settings: cisco-av-pair=device-traffic-class=switch
• Interface/Service templates
• EEM

I would start with NEAT option and check results.

[kvenkata1]

I would try NEAT with Interface Template as described in this guide.

NEAT with Interface Template

- Krish