Hello everyone, could any one tell me, please, in which YANG model i can check the output of "show policy-map type epbr" information. I should gather input and output information through NETCONF YANGSUITE. Thank you in advance
Forum Posts
Hi,I tried to launch sandbox few weeks back,then I tried to launch IOS XE on Cat8kv,which opened for me after couple of attempts.Again I tried to launch it but I couldn't,because the launch button is disabled as it reached maximim no,of connections t...
Respected Members,I am using dual Exanic X-25 cards one for two interactive[TCP] connections on individual port and one for Multicast data only. I have attached hardware ,firmaware report and pcap file of both the ports in zip file.I am facing retran...
Getting below error while using https://developer.cisco.com/learning Please suggest there is new web url
Has anyone encountered an increase in data penetration latency when using exasock for transparent acceleration on a k3p-s(X25) device?The background of the issue is as follows: I am using a third-party service's dynamic library to send network data t...
I have been trying to collect telemetry data and I am getting a hard time obtaining power data.Here's a sample telemetry collector config (telegraf):```[[inputs.gnmi]]name_prefix = "app.company.network.device."addresses = ["${HOST_ADDRESS}"]username ...
I have been comparing the latency performance of the K3P-Q (x100) vs the K35-Q (x40) cards on our systems using the exanic_perf_test application in loopback mode. While the stock image of the K3P-Q has lower latency than the K35-Q, I am finding that ...
Hello,I am trying to preload a number of packages to the exanic card, and send them sequentially (in a for loop). I am using the example given here:https://github.com/cisco/exanic-software/blob/master/examples/exasock/tcp-preload-slot.cHowever, from ...
Hello i want to parse transceiver information from switches via genie but i can't get structured data except "show interfaces transceiver" command and it only works for 9300 model not for likes of 3650 or 2960 series. Commands like;show interfaces tr...
Resolved! Dedicated user for APIs
Good morning everyone, I am currently trying to dig an API approach on a 9800-CL, to create Guest Users through API. I tried with my admin user, everything works correctly, the customer is satisfied of the firsts tries and we are going deep in this w...
Hello, everyone, really need a helpI bought a Cisco Router RV345 and it's not operationable at allThe problems: console, lan, wan ports not working, only light PWR is always onCLI via Putty doesn't work, but as I know console port can be desibled for...
I am trying to create an application for EXANIC X10 and learning about the process.The only material I found is the "Cisco Nexus 3550 FDK User Guide - Overview [Cisco Nexus 3550 Series] - Cisco.pdf".Is there any more detailed material to guide to the...
Resolved! AP inventory AIREOS
Hi guys!I knew in this world of automation, I trying to get an inventory of all AP's that are register in a WLC 5520 - AIREOSThis is part of my code. df = pd.DataFrame()data = {}# obtiene la lista de ips a conectarsewith open("ipdiscoc.txt", "r") as ...
I did "NETCONF/YANG on Nexus" labs and noticed that changes do not get saved to startup-config. NETCONF capabilities of NXOS sandbox do not include ":startup", so <copy-config> operation can not copy running-config to startup-config. What is the othe...
Resolved! Exablaze X10网卡在Linux上显示RX-Dropped
ExaBlaze X10低延迟网卡，安装在Centos8（Kernel 4.18）上。使用ifconfig命令显示网卡的RX-Dropped不断增加。但是直接使用exanic-config工具检查网卡，则发现RXDropped为0。请问两者数据不一致的原因是什么ExaNIC X10的驱动版本为2.2.2
