I'd like to know if you have experience with upgrading an ASA5506 from 9.8 to 9.16. I have an s2s IPsec IKEv2 configuration with group 14 and 19. What impact will this have on IPsec? Could you please share your experiences? Thank you!
Forum Posts
I am trying to upgrade the firmware on ASA's we have at multiple sites but for some reason copying over the firmware fails. We are currently running FP2140's in ASA mode and whenever I copy the files over from a windows machine, it fails. I am using ...
Hello, I just upgraded FMC to version 7.2.6 and want to upgrade a FTD H/A pair next. However, I can only select "unattended mode", which will copy the upgrade file to the FTD and then run the readiness check. I would prefer to do those steps manually...
Title says it all. Anyone encounter this yet?
FTD 1140interface configured as "passive",access rule "passive" (configured per FTD configuration guide to set hardware interface passive)Connected to SPAN port (span port verified functional from laptop)From the firewall perspective, it appears tha...
Resolved! upgrade process of firepower 2130
hello We have a old fire power that I have no idea how to upgrade. The actual device is a Cisco Firepower 2130 Threat Defense (77) Version 7.0.4 . Cisco Adaptive Security Appliance Software Version 9.16(3)18. and we have a FMC that is Cisco Firepower...
HelloWe have a lot of clients getting the following error when contacting diffrent sites: ERR_SSL_PROTOCOL_ERROR, we have read that SonicWall and Palo Alto also have these problemes. Solution is to turn off "TLS 1.3 Hybridized Kyber Support" in chro...
Does anyone have a permanent fix they have found for this? I've opened a ticket with Cisco on this issue, and was just told use my workaround, that this is a known issue and it would be resolved in the next release. That was in December. There has be...
HelloI need to export all events from level informational from an ASA5508 to a syslog server. Basically, I set it as "logging trap informational"This device provides firewall services as well as remote SSL VPN access and WebVPN.I noticed that AAA and...
Hi I need to migrate multiple FTDs management to a newer FMC from current FMC. Current FMC IP is Over VPN to manage the FTD Devices at remote end. In the New plan we will use WAN IP as new Mgmt IP. Please provide some reference link so I can review...
Hello everybody,because the new vulnerabilities CVE-2024-20353 und CVE-2024-20359 I haveto upgrade several ASA5508 and ASA5516.The Cisco Software Checker shows the release 9.16(4)57 that fix the issue butit is not available on the download page. See ...
Hello everybody,the customer has FMCv 7.2.5.1 running and I need to upgrade it because devices need to be upgrade too.The Cisco Software Checker shows me the rel. 7.2.6 in this release trainas the successor but the download page does not offer 7.2.6 ...
Hello everybody,because the new vulnerabilty I have to upgrade a ASA5516-X with FTD from 7.0.5 to 7.0.6.2.The FMCv is running rel. 7.0.6. The upgrade a ASA5516-X with FTD from 7.0.5 to 7.0.6 failedeven if the readiness check was successful.I repeated...
Hi,Can anyone please provide me the procedure the version upgradation from 9.8(4)29 to 9.12.4.67? What are pre-requisites ?
Is there any truth to the rumor that ASA software has been leaked, encryption reverse-engineered etc.? Just wondered if it's true or nonsense. I guess this might get deleted, which would be an answer of a sort I suppose.
