cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
156
Views
1
Helpful
4
Replies

Cisco ISR not getting DHCP / IP Address

abdulhakam
Level 1
Level 1

My router not getting IP Address after reload. 


Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0/0 192.168.231.9 YES NVRAM up up
---GigabitEthernet0/0/1 unassigned YES DHCP up up---

Gig 0/0/1 Connected to ISP Router, since we not getting the ISP our VOIP Services down. 

Model : Cisco ISR 4331
Anyone can assist me on this ? 

TQ

4 Replies 4

ask ISP to shut/no shut the interface
do
debug ip dhcp packets <<- share it here
MHM

Hello,

you can also do the following:

ISR4331#conf t
ISR4331(config)#interface GigabitEthernet0/0/1
ISR4331(config-if)#no ip address dhcp
ISR4331(config-if)#shut
ISR4331(config-if)#no shut
ISR4331(config-if)#ip address dhcp
ISR4331(config-if)#end

abdulhakam
Level 1
Level 1

Hi, thanks for the update. After some time we getting the IP Address from the ISP. I did shut & no shut the interface for several time & still same. Not sure what is the cause but i notice it happen after the VG reload. For now i unable to contact ISP & the issues resolve so unable to capture the debug.

 

 

Hello,

who is your ISP ?