Hello Guys,Good Day !!Need your help and guidance on cli commands to configure the NAT for the Internet Link on cisco cEdge for the direct L3 TLOC extension (Private IP address) between the 2 cEdges.In vEdge we can simply config NAT enable under the ...
Hello Guys,Good Day !!This is very strange that : on version 20.9.4 the login banner is coming after the login prompt but it is perfectly coming on version 19.2.31 i.e. before login prompt.Would you please help me to fix : i am on version 20.9.4Early...
Hello Team,Please help me to understand: in hybrid scenario of Controller deployment, if vBond resides behind the NAT, and lets say cEdge on-boarding is done with the Internet as TLOC then as we know, vBond should learn both the Private and NATed pub...
Hello Everyone,Greetings,i have one query for the scenario that: if my L3 VLAN are created on the core SW and then to the upstream all the VLAN traffic is routed towards the firewall with the default route then how i will configure the Service side V...
Hello All, Good Day to You !!Hope you are doing well !!Looking for your support and suggestion on the below Query: I have 2 Nexus devices on which 2 WAN links are terminated from different ISPs and LAN prefixes are received from the other multiple si...
Hi Kanan, Thanks for your reply I have tested this the lab environment. Yes the c-Edge is having direct internet termination on one of the interface from the ISP. I got the same command line from one of the Cisco live doc. On page no. 15 Refer below ...
Thanks Torbjorn For you suggestion and guidance.Its "U" turn on the Firewall which resolves the communication of vBond over Public IP addresses with other controllers.
@Kanan Huseynli: Thanks for your response !!what is the deployment type?: this is hybrid depolyment --> Controllers are in Public cloud in VPC under the same subnet or same firewall zone as well as rendundant controllers are there in another region i...
