The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Yes! You can change your fligh퓣 on 퐀llegiant 퐀퐢퐫퐥퐢퐧퐞퐬.com or the 퐀llegiant 퐀퐢퐫퐥퐢퐧퐞퐬 app in four steps: Go to My Trips. Select “Change fligh퓣” Select “Edit” to update your fligh퓣. Or call 퐀llegiant 퐀퐢퐫퐥퐢퐧퐞퐬 change fligh퓣 officials at ☎ ퟭ-ퟖퟓퟓ ✈ ퟗퟓퟔ ✈ ퟓ...
I am wondering what the command would be for automating a shut, no shut on Cisco 2960x switches.I would need to target a few Gi #/#/# ports. Any good tested recommendations?
What is modularity in network design? (a) Ability to to create self-contained, repeatable sections of the network(b) Ability to scale and accommodate future needs of the networkHello Community, kindly help my understanding, I believe the answer to th...
We are having an odd issue with newer versions of Iphone/IOS when try to access the ISE Guest Portal.The users start the CWA flow, connect to the SSID then gets an username and pass provided by cisco ISE, then login using the provided credentials and...
I have digital clocks on my network that I manually have to port bounce once in a while.How can I automate a port bounce in ISE? What is the best way to complete a shut, no shut?Do I need to inject a script in ISE and specify devices or use a custom ...
Hi, I have a CUCM 12.5 system where a Call Pickup Group is not working as it should. I have checked the CSS and Partition setup and all phones are assigned CSS's which have access to the Partition containing the pickup number. However when I use Dial...
We have more than 40 cisco switches in the network that has lost IP connectivity via the management IP. All ports, access, and network trunks, are up and passing data and voice traffic but we cannot ping some time all the access switches via the man...
Hi guys,I have a bit of an issues. I've got two routers on my bench that I building models for a FlexVPN deployment a couple of customers. Some customer are still running 2900 and others running 4000; we are in the process to replace these older mach...
Hello,We are having ISE for EAP/TACACS authentication and, hosted internally in our datacenter.Now we have configured BYOD captive portal that tied to AZURE SAML authentication, the current captive portal redirect URL from ISE has prepended the node ...
we are using Cisco Aironet 1815i Access Point as a WLC and Access point and need to be upgrade the firmware version 8.5.140.0 to 8.10.185.0. please suggest the step by step process that we need to be followed.
We have a 2950G that has lost IP connectivity via the management IP. All ports, access and network trunks, are up and passing traffic but there we cannot reach via the management IP. Had been working previously and has gone up/down a few times. Ple...
I have ASR1001X and running ISG to manage and maintain customer services.ASR1001-X has 1 subinterface facing subscribers and 2 subinterfaces back to the core then internet.Subinterface facing subscribers is configured with ip nat insideSubinterface f...
Good Afternoon, I need some help, I am migrating my config from an asa5510 to asa5525-x I started to try moving all of the settings over but then it got a little confusing. Is there some one that can help me Thanks
With the Webex Suite upgrade, I no longer see the option to lock a participant's video to a specific location. I'm in Grid view, and don't have "Focus" turned on. This used to work in this view. Is this an intentional change?Screen shot of what I see...